LIC Motorsports 5x114.3 to 5x100 Bearing/Hub Conversion
#1
Former Sponsor
Thread Starter
iTrader: (10)
Join Date: Feb 2004
Location: 865 A Sweetser Ave.Novato, CA (new shop smell too)
Posts: 3,426
Car Info: MY04 STi some call it a race car
LIC Motorsports 5x114.3 to 5x100 Bearing/Hub Conversion
LIC Motorsports 5x114.3 to 5x100 Bearing/Hub Conversion*
LIC Motorsports has been working long and hard to bring these 5x114.3 to 5x100 conversion Bearings/Hubs to the marketplace. Ever since the release of the custom modified knuckles back in early 2011, the demand has been made and it is now available.
Commonly folks whom track their cars are trying to upgrade the bearings b/c the older style stuff just has too much failure under harsher conditions. These OEM 05+ STi bearing/hub assemblies have been machined down to fit the WRX and 04 STi. The lug pattern has been changed/drilled to 5x100 and outer OD has been trimmed to accommodate the smaller ID in those rotors. This is a perfect way to do things in stages and avoid the step of having to get rid of the current 5x100 wheels/rotors. These bearings still require the use of 05+ Knuckles (be sure to check out all the options LIC Motorsports has available in the "Knuckles Catalog", which cover's everyone's needs to be able to run these units).
Notes:
-Fitment: 02-07 WRX, 04-08 FXT, 04 STi
-Will require the use of LIC Motorsports 6mm or 8mm ABS/Speedo Ring Spacer
-ARP Extended Studs can be substitued
-Sold in pairs only (Quantity 2)
These can be found in our Bearings/Hubs Catalog: LIC Motorsports + Bearings/Hubs Catalog | Buy Online at LICmotorsports.com!
-Noah
LIC Motorsports has been working long and hard to bring these 5x114.3 to 5x100 conversion Bearings/Hubs to the marketplace. Ever since the release of the custom modified knuckles back in early 2011, the demand has been made and it is now available.
Commonly folks whom track their cars are trying to upgrade the bearings b/c the older style stuff just has too much failure under harsher conditions. These OEM 05+ STi bearing/hub assemblies have been machined down to fit the WRX and 04 STi. The lug pattern has been changed/drilled to 5x100 and outer OD has been trimmed to accommodate the smaller ID in those rotors. This is a perfect way to do things in stages and avoid the step of having to get rid of the current 5x100 wheels/rotors. These bearings still require the use of 05+ Knuckles (be sure to check out all the options LIC Motorsports has available in the "Knuckles Catalog", which cover's everyone's needs to be able to run these units).
Notes:
-Fitment: 02-07 WRX, 04-08 FXT, 04 STi
-Will require the use of LIC Motorsports 6mm or 8mm ABS/Speedo Ring Spacer
-ARP Extended Studs can be substitued
-Sold in pairs only (Quantity 2)
These can be found in our Bearings/Hubs Catalog: LIC Motorsports + Bearings/Hubs Catalog | Buy Online at LICmotorsports.com!
-Noah
Last edited by LICmotorsports; 04-20-2012 at 05:06 PM.
#4
Former Sponsor
Thread Starter
iTrader: (10)
Join Date: Feb 2004
Location: 865 A Sweetser Ave.Novato, CA (new shop smell too)
Posts: 3,426
Car Info: MY04 STi some call it a race car
been a long time coming...this now completes our knuckles catalog and offerings (until the BRZ comes out, lol)
-Noah
-Noah
#6
Former Sponsor
Thread Starter
iTrader: (10)
Join Date: Feb 2004
Location: 865 A Sweetser Ave.Novato, CA (new shop smell too)
Posts: 3,426
Car Info: MY04 STi some call it a race car
you have read it incorrectly. Per what you're saying, you are referring to these that we offer: https://www.i-club.com/forums/suspen...uckles-235867/
no, none of these are for 05-09 LGT
-Noah
no, none of these are for 05-09 LGT
-Noah
Thread
Thread Starter
Forum
Replies
Last Post