i got the error codes
 

my warning light came on when i was going up a hill in seattle. the check engine light. i was woundering if anyone has one of those things that read error codes.if you can help i would be very happy.

thanks if you can help..:(

the NW area forum may be a better place to ask.... ;)

well i just thought i know everyone comes through here why not put it in the biggest area! but im going there 2.:confused:

my error codes are
po182 low
po102 low
po113 high

does anyone know how to read this?

how do i get this damn check engine light to go off.:mad:

You can reset the check engine light by disconnecting the negative cable from the battery and pressing on the brake for a minute or so. This will reset your whole computer and will cause gas mileage to be crappy while it relearns.

i got the check engine light to go off witht the code reader but it keeps coming back on.:mad:

Well I'd take it to the dealer then. It's trying to tell you something's wrong. Any mods? It should still be under the 3 year warranty.

Could be that gas cap thing. Next time you fill up make sure you tighten the cap till it clicks. If this is the problem, the light'll go off within a tank or two.

[QUOTE][i]Originally posted by michaelmorteo [/i]
[B]my error codes are
po182 low
po102 low
po113 high

does anyone know how to read this? [/B][/QUOTE]


po182 low Fuel Temperature Sensor A Circuit Low Input
po102 low Mass or Volume Air Flow Circuit Low Input
po113 high Intake Air Temperature Circuit High Input

Hope this helps,
Jun

thanks. well the light shut off yesterday by itself. i guess the fuel air had to adjust itself. that why it was on but it off now and i've gained 3psi of boost. yeah!:banana: