So. FLa. Installation help
 

Anybody knows how to install springs and or muffler for cheap in miami/ft.lauderdale area?

Springs no......... Muffler, that isn't very hard. Is it a Cat back? If so, that's fairly straight forward. A couple of bolts, a couple of exhaust hangers, and those springs on the stock flex joint you'll want to keep.

BLue

thanks blue

[QUOTE][i]Originally posted by RUDEBWOY [/i]
[B]thanks blue [/B][/QUOTE]

Anytime man.

Oh and hey......... before you attempt this install........ I suggest going here to see if they have detailed instructions on how to do the cat back install: Believe me, it'll save you a bunch of headaches.

[url]http://www.scoobymods.com/forums/showthread.php?threadid=369[/url]

Dynamic Turbo will do the spring install for $125 IIRC. Trust me, it is worth it. Even though I have the tools and experience to do the job (I need to install struts on the wife's RS soon) I am probably just gonna pay to have them installed by these people.

It is at least a 4-6 hour job in the driveway, since you have to remove each strut (that is easy), compress the spring, remove the top-hat ( did I mention you NEED to have air-tools to do this properly?), un-compress the spring, compress the new spring, put top-hat back on, un-compress new spring, then bolt the whole thing back in the car. Repeat for each spring. This doesn't even mention having to jack-lower each side if you don't have a lift at your disposal... The only time I did this I was using a buddy's lift...

Thanks Blue and thank you 4ester. Once again u 2 save the day.

jus wondering
 

Where do you guys/girls go to get your uppipes and downpipes installed?

Re: jus wondering
 

[QUOTE][i]Originally posted by WhiteRex [/i]
[B]Where do you guys/girls go to get your uppipes and downpipes installed? [/B][/QUOTE]

Well, I had my friend Help me with mine....... so for me...... My own home!

Hmmm, maybe Dynamic Turbo could do the install for you? Uppipe is an install I wouldn't suggest trying unless you know what you're doing. My friend knew, and we still managed to dent my oil pan! BOO POOIE!!

Call around..... look for places that have dealt with the WRX before and done the install. I'll see what I can find for you on local places.

Blue

Here WhiteWRX: Check these guys out. They never showed up when I went there for 3 gauge installation.... so I never got to see what type of work they do. But they are supposed to be really good. [url]http://www.tavracing.net/Miami/news.php?page=1[/url]

and [url]www.dynamicturbo.com[/url] (or something like that) DOH

latas,

Blue

Thanks.