FT: *NEW* KYB AGX/ Prodrive Springs 02+ WRX *NEW*
Thread Starter
Registered User
iTrader: (21)
Joined: Mar 2007
Posts: 762
From: Oakland
Car Info: 2001 Honda Oddysey
FT: *NEW* KYB AGX/ Prodrive Springs 02+ WRX *NEW*
Struts and Springs have been sold.
Thanks everyone
Thanks everyone
Last edited by Ivegotthenuts; Aug 19, 2007 at 10:42 PM.
tellin yah man... you should do this set up. slamming ur car too much will make it handle kinda iffy at the limit. i got prodrive spings right now and it beats zig zagging over bumps.
Last edited by RU-X; Aug 15, 2007 at 12:34 AM.
Thread Starter
Registered User
iTrader: (21)
Joined: Mar 2007
Posts: 762
From: Oakland
Car Info: 2001 Honda Oddysey
Got any pictures of your car from the side??
Registered User
iTrader: (12)
Joined: Apr 2004
Posts: 482
From: Oaktown
Car Info: 2002 wrx, new (to me) 2006 exige, low n slow miata
Get the RCE front camber plates and you'll probably be happier with the look. It gives you another .5 to .75 inch drop in the front, evening things out, and also gives you camber adjustment. I love mine (AGXs with H&R springs)
Thread Starter
Registered User
iTrader: (21)
Joined: Mar 2007
Posts: 762
From: Oakland
Car Info: 2001 Honda Oddysey
Too expensive
Last edited by Ivegotthenuts; Aug 16, 2007 at 06:19 PM.
the artist formerly known as mcdrama
iTrader: (23)
Joined: Apr 2004
Posts: 6,428
From: Santa Cruz Mountains, CA.
Car Info: WRBP 2015 WRX Premium/CVT
this is a great setup.
For 04-07 WRX models you can only use the struts, then expand the hole in your rear top mount, 2x washers on top of the topmount, and you're set.
I have KYB AGX struts on my 04 wagon with USDM STi pink springs and Noltec topmounts in the front. pic at http://mattsn0w.com/wrx/
For 04-07 WRX models you can only use the struts, then expand the hole in your rear top mount, 2x washers on top of the topmount, and you're set.
I have KYB AGX struts on my 04 wagon with USDM STi pink springs and Noltec topmounts in the front. pic at http://mattsn0w.com/wrx/
Last edited by mattsn0w; Aug 18, 2007 at 01:37 PM.
Registered User
iTrader: (19)
Joined: Jan 2006
Posts: 751
From: South San Jose
Car Info: 2007 WRX CGM
this is a great setup if you are running an 02-03 WRX.
For 04-07 WRX models you can only use the struts, then expand the hole in your rear top mount, 2x washers on top of the topmount, and you're set.
I wave KYB AGX struts on my 04 wagon with USDM STi pink springs and Noltec topmounts in the front. pic at http://mattsn0w.com/wrx/
For 04-07 WRX models you can only use the struts, then expand the hole in your rear top mount, 2x washers on top of the topmount, and you're set.
I wave KYB AGX struts on my 04 wagon with USDM STi pink springs and Noltec topmounts in the front. pic at http://mattsn0w.com/wrx/