STi Key Blank
Thread Starter
Registered User
Joined: Sep 2009
Posts: 53
From: Hawaii
Car Info: ?
STi Key Blank
Just wondering where else I can get it copied from my original key to the STi Key besides at Subaru. I heard I can get it done at Palama Market because they have a key copier?
Registered User
iTrader: (4)
Joined: Nov 2002
Posts: 3,462
From: Honolulu, HI
Car Info: 2008 MB C350S Chip/Exhaust 268whp
If you are talking about the STI titanium key, they are quite tough to copy(from a non titanium WRX style) so I recommend going to a place like Home Depot or any other place that have a newer and more accurate type copier.
If you are hoping to use the the key on your 06, it won't work on the ignition because your key from the factory has a code programmed into it. I don't think that the sti titanium key has the provisions for that. However, if you just wanted the key for the hell of it, you can get it cut and it'll open your door and trunk.
Registered User
Joined: Jul 2008
Posts: 1,347
From: 925+415
Car Info: 05 CGM STi to be converted to RS
home depot, free.
if you want it to work properly, take the chip out of your oem key, there should be a little slot you can open. tape it up to make it bigger then ziptie it down between the wires in the steering column.
if you want it to work properly, take the chip out of your oem key, there should be a little slot you can open. tape it up to make it bigger then ziptie it down between the wires in the steering column.
Which is the titanium key? The funky one that all the ricers (like me) have/had?
As long as you don't have a chipped key you can go anywhere with the machine...just make sure to try it out.
As long as you don't have a chipped key you can go anywhere with the machine...just make sure to try it out.
Thread
Thread Starter
Forum
Replies
Last Post
thebing
Interior, Exterior & Lighting
6
Jul 6, 2004 10:07 AM
WRX_Man20
For Sale by Members
7
Feb 26, 2003 06:22 PM
