I just changed my car's setup yesterday, so have the following items that I no longer need. So here goes!

1) Modified TurboXS downpipe.

This downpipe is a TurboXS downpipe that was modified to be able to bolt straight onto a non-turboXS catback exhaust. It has an O2 sensor bung welded into it also. Perfect for those who want massive 4 inch bellmouth DP for less money Price on this will be 180usd.
Here is a link to a pic:

http://i4.photobucket.com/albums/y11...9/IMG_0876.jpg

2) Next, is a 5Zigen catback exhaust.

This is a 3 inch unit that necks down to 2.5 after the muffler/resonator at the can. This exhaust has been on the car for 20K miles. This was a great exhaust to run catless with because it was just so much quieter than what one would normally associate with a catless exhaust. I made over 300whp with this catback (as well as the turboXS DP) when I got my car tuned just over a year ago. Everything is in great condition, and ready to bolt on. With a cat in the system, the exhaust is very quiet. Oddly enough, it didn't get any louder when I went catless with it. The sound produced under 3K rpms is nice, with it letting of a nice tune when you really give it. This exhaust does not drone or anything on the highway, and I would call it a wifey-friendly exhaust...(Heck, if my parents can ride in the car without complaining about how the car is noisy compared to their escalade or S500, I'd say it will pass any test out there ) Price on this will be set at 275 shipped since it is heavy piece. The exhaust can has a few light scratches it, but cannot be seen when installed. You have to be underneath the car to see them.

http://i4.photobucket.com/albums/y11...9/IMG_0887.jpg

Here is a link to the dyno shootout by Turbo Magazine. It has some info on the 5Zigen catback: http://www.turbomagazine.com/tech/0...aust/index.html

Here is a link to the best pic I can get of the scratches... My digital camera is very picky as to what pics it will take...

http://i4.photobucket.com/albums/y11...9/IMG_0891.jpg

3) Next up is a set of STi pink 565cc injectors.

These have been on the car for 12K miles. Perfect for those looking for an oem injector solution for their upgrades. Price on these will be 250usd.
Pic: http://i4.photobucket.com/albums/y11...9/IMG_0881.jpg

4) Next is a JDM STi upipe minus heatshielding.

This has been on the car for 12K as well, but as is the case with most OEM JDM catless upipes, the spotwelds failed and the shields rattled around enough to send my car's knock sensor into freak-out mode...
I had the shielding removed, and here is what is underneath it all! It is in great condition with no cracks or leaks of any kind as I have used it this way for the past 7K miles. Good for those looking for a catless oem uppipe on the cheap that will not leak, since it is an oem piece Price on this will be 50 shipped.

You can use some exhaust wrapping on it, or install as is (I ran it for the past 7K miles as is when the shielding started comming off).
Pic: http://i4.photobucket.com/albums/y11...9/IMG_0884.jpg

5) Perrin Short Ram intake for wrx.

I think everyone knows about these This one has the black hose. Produces a nice sound on spoolup, but I really got this because I wanted something that would work with my FMIC setup. All is in excellent condition and ready to go. I will also include the metal stand that Perrin includes with these intakes which allows the intake to be supported in the engine bay. THose of you with FMIC's may not use the metal piece, but it is there nonetheless. Price on this will be 100 shipped.
Pic: http://i4.photobucket.com/albums/y11...9/IMG_0877.jpg
SOLD!!



6) Modified fuel pressure regulator

This is a fuel pressure regulator that has had the pressure bumped up by 10 psi exactly to give more fuel headroom. Great for those who want to keep their stock one for future use. I'll set this one at 20bux shipped.
Pic: http://i4.photobucket.com/albums/y11...9/IMG_0886.jpg


The parts all came off the car last night, and they are obviously could use some cleaning to pretty them up, but I included pics anyway for you to see.

Payment can be paypal. For those who plan on using paypal though, you'll need some feedback since I don't want a repeat of what happened to me here: http://forums.nasioc.com/forums/showthread.php?t=834621 where I was taken for the money and the parts as well.

I know that this isn't ebay, but it seems that there are people everywhere that will not hesitate to abuse the system at the expense of others as is seen from the stickies on top of the forum...

That transaction in the above thread thought me that just because I might treat others as I would like to be treated, the world doesn't always do the same....

If there are any questions, or anything I can help with, please don't hesitate to pm me

Hope the links work!

Thanks

 

Linkies no workie.

 

replied all pm's guys...

I'll get to work on the links to try to get them working.....


Thanks!

 

Links should work now!


EDIT: Catback in tentatively sold pending payment!

 

EDIT: Perrin shortram intake is sold pending payment!

 

Ok, catback is sold!!

 

New price on the DP! 150 plus shipping

 

wanna work on the price of those injectors?

 

Send me a pm, and we can try to work something out..

 

New pricing on the STi pinks! 220 shipped!

New pricing on the TurboXS DP - 130 plus shipping!

 

pinks are FPR are pending!

 

Evening bump guys....

FPR, Injectors, downpipe and uppipe are STILL available! If you are still interested, let me know!

 

Injectors and FPR are SOLD!!!!

 

Up pipe is SOLD!!!

 

will the downpipe fit up 2 my apex'i n1 catback?
late
brad