Yuba City Subby Help!!!!!
#1
Yuba City Subby Help!!!!!
Anyone in marysville/yuba that can help me out? I did a vf34 turbo upgrade and now my sub is spraying coolant out (only after running for 5-10 minutes). Its around the turbo area but the turbo is dry, coolant is gathering up on the block. HELP I can't goto work tommorow w/o getting this fixed!
#5
Registered User
iTrader: (14)
Join Date: Nov 2001
Location: Peoples Republik of Kalifornia
Posts: 14,221
Car Info: 05 H2 SUT, 45 GPW, 10 Murano, 13 Boss 302
There's only two coolant lines you would have messed with on the turbo itself - a supply and a return. Is one of those leaking? It's easy not to get those on all the way, especially the return line towards the bottom of the turbo.
If it's not a loose clamp and isntead it's a split in the line, you can temporarily replace the line with heater hose until you can get the correct bent hose from somewhere like http://www.subaruparts.com .
If it's not a loose clamp and isntead it's a split in the line, you can temporarily replace the line with heater hose until you can get the correct bent hose from somewhere like http://www.subaruparts.com .
#6
BanHammer™
iTrader: (8)
Join Date: May 2000
Location: Wagonmafia Propaganda Lieutenant
Posts: 47,585
Car Info: 2001 Forester RS2 SPEC-F
make sure there is a crush washer under and over the banjo bolt on the coolant inlet on top of the turbo
this is usualy a mistake that happens on the first time someone replaces a turbo
this is usualy a mistake that happens on the first time someone replaces a turbo
#12
Thanks!
Thanks for the help guys. I got it all figured out monday afternoon. the clamp on the turbo hose wasn't on correctly. (what an ordeal). Everything is running OK now. SS is tuning me up in the morning (HURRAH!)
#15
Not as much as I'd like to have. I'm a little disappointed. They say its because of my Utec and if I went with a ECU flash i'd get around 15 more whp. I'm still getting a little detonation here and there...
So the dyno results were 238whp they say thier dyno reports a stock wrx at around 156whp (if I remember correctly). Not to shabby.
Thanks to Nate from SS for taking the time to dyno my car, and I have to say the staff there is VERY knowledgable and friendly.
So the dyno results were 238whp they say thier dyno reports a stock wrx at around 156whp (if I remember correctly). Not to shabby.
Thanks to Nate from SS for taking the time to dyno my car, and I have to say the staff there is VERY knowledgable and friendly.
Thread
Thread Starter
Forum
Replies
Last Post
johnny_boy02
NorCal Classifieds
1
10-10-2010 10:47 PM