well its all back together, with A/C !! :)

i am super excited to have A/C back in the car, which means those hot summer days in the rain i can see out the fog windows, on the hwy i can roll up the windows so its nice and quiet in the car driving along.


[img]https://farm6.staticflickr.com/5525/9086243718_d747eb8155_b.jpg[/img]

[img]https://farm6.staticflickr.com/5499/9086245412_c85cc1a463_b.jpg[/img]

one invented bracket later ( thanks to Vin@NVauto for welding me the brackets)

Alfa Romeo dual lock Sliders ( parts my dad likes to keep from the 1960's lol)

one down next one to go while i wait for the intercooler that is on its way for tomorrow.


Recaro VW Jetta gli seats (Franz idea put into action)
[img]https://farm3.staticflickr.com/2828/9138434981_630f78857f_b.jpg[/img]

[img]https://farm6.staticflickr.com/5327/9140668200_0b13dfd1f0_b.jpg[/img]

crazy build

Some how some way this has to go in there lol.

[img]https://farm8.staticflickr.com/7292/9169325813_fa87d7717e_b.jpg[/img]

Not even scared left hand side hole, also new style power steering resvior to acomadate the hole.

[img]https://farm3.staticflickr.com/2871/9171548642_e774258f65_b.jpg[/img]


Battery mounted flat with right and side hole.


[img]https://farm6.staticflickr.com/5500/9171549768_a79f0a104a_b.jpg[/img]

i was thinking mine was to big LOL

[IMG]http://bmw-e30.net/wp-content/uploads/2012/01/PICT0366_resize-585x438.jpg[/IMG]














beam is sliced up and Reinforced ready to go !.. thank you Nam@NVauto for letting me use that fantastic plasma cutter you own !... short work beats the old hack saw way for sure, i need one for my place in the future.

the cooler sure is not small lol, overkill in size for sure but for the future well planned out
[img]https://farm4.staticflickr.com/3745/9187631934_f11b2d0e11_b.jpg[/img]

[img]https://farm4.staticflickr.com/3681/9187628894_153849aa11_b.jpg[/img]

6" thick lol
[img]https://farm4.staticflickr.com/3687/9187634574_668f7c385a_b.jpg[/img]

so the broken spun rod bearing motor with the wiseco pistons and manley rods is alive !! motor #1 EJ22T she lives and is running ok !

but that was just to bleed coolant and do the flush and check everything over. OK SUBARU !


motor #2 (aka the spare), EJ22T with wiseco pistons (@ machine shop getting fitted), Carillo Rods, ACL race bearings.

thanks to Dov@NVauto for my pistons and rods !

i picked this time around the super light weight SA rods from carrillo ! on my turbo legacy i used the very expensive and rugged H beam version. ill try something different with the spare.

[img]https://farm4.staticflickr.com/3791/9195196957_f2f8faeabb_b.jpg[/img]


the seat base creation like the passenger i had to make. its all 304L SS so no rust after 50years !... tig weld and we are good to go !..

[img]https://farm3.staticflickr.com/2838/9197981808_0e90a5dc7c_b.jpg[/img]

well its been a while, i have been running the motor in a bit all is good ! even beat it up a bit with out a intercooler on she feels good.

what i have been doing to get it done so far is all this stuff.

Recaro seats are both in & i think best freaking seat out there hands down !.. my favourite mod for sure there that good.
[img]https://farm4.staticflickr.com/3777/9274955438_0f7af8cd6e_b.jpg[/img]


so i got the intercooler mounted, she looks ok so far.

[img]https://farm8.staticflickr.com/7405/9272169427_7565ce4493_b.jpg[/img]

[img]https://farm6.staticflickr.com/5493/9272168447_78c7a88cf2_b.jpg[/img]




so instead of cutting the only mint condition bumper cover left on the plant rare to the Canadian models of the GL-10, I found some scrap yard in West coast Canada that had 2 skins with full Re-Bar set up.

just need to paint the lower section white like the original I have put away for safe keeping.

[img]https://farm4.staticflickr.com/3818/9325799512_a229b3d50d_b.jpg[/img]

[img]https://farm6.staticflickr.com/5502/9323006071_b0a0361371_b.jpg[/img]

[img]https://farm4.staticflickr.com/3731/9323007885_ffe1a63156_b.jpg[/img]

[img]https://farm4.staticflickr.com/3708/9323007001_d21ab82ddd_b.jpg[/img]



also who would have new that the BRZ rad is the same size and thicker with the bigger ports !.. its needs a bit of work to put in but same size and 2 Row !

[img]https://farm8.staticflickr.com/7309/9274959276_be393bc8be_b.jpg[/img]

[img]https://farm3.staticflickr.com/2888/9272170329_359df1a120_b.jpg[/img]



and to make sure I can view all my sensors a AIM MXL Strada

[img]https://farm4.staticflickr.com/3691/9323133705_759537a578_b.jpg[/img]

Damn we need to talk!

I have an EJ22t block. It was pulled out of a car and still has the SOHC heads on it haha

[QUOTE=Nico Leone;3426813]so instead of cutting the only mint condition bumper cover left on the plant rare to the Canadian models of the GL-10, I found some scrap yard in West coast Canada that had 2 skins with full Re-Bar set up.

just need to paint the lower section white like the original I have put away for safe keeping.

[img]https://farm4.staticflickr.com/3818/9325799512_a229b3d50d_b.jpg[/img]

[img]https://farm6.staticflickr.com/5502/9323006071_b0a0361371_b.jpg[/img]

[img]https://farm4.staticflickr.com/3731/9323007885_ffe1a63156_b.jpg[/img]

[img]https://farm4.staticflickr.com/3708/9323007001_d21ab82ddd_b.jpg[/img][/QUOTE]

Nice. I'd actually paint it black for a more stealth look, but I do think it will still look good in white as well.

[QUOTE=sigma pi;3426926]Damn we need to talk!

I have an EJ22t block. It was pulled out of a car and still has the SOHC heads on it haha[/QUOTE]

lol take it apart toss all but the block and crank and build her up to a monster :D


[QUOTE=04GG;3426950]Nice. I'd actually paint it black for a more stealth look, but I do think it will still look good in white as well.[/QUOTE]

i was thinking of black also but then i would need to find a spare rear bumper to match the front.

maybe ill get two more sets and do a black version
















so far this is how i mounted the aim cluster but i think i will change it once my spare cluster comes in from the scrap yards. the flush mount should look much better if it fits.

[img]https://farm4.staticflickr.com/3826/9355177422_d27b7f9301_b.jpg[/img]



also from japan ! L'aunsport [url=http://www.launsport.com/]WRC???????????????????????????????????SPARCO[/url] WRC hood vents from GR Subaru model. Eita is a great guy even sent me books on subarus and mesh.

these vents are like subaru america rally car ones with out the hole trim, they have the L shape thing and just cut out.

[img]http://www.launsport.com/cargo357/image/GH2%2009%20BONNET%20FRP/1.jpg[/img]

[img]http://ih.constantcontact.com/fs170/1103211070252/img/369.jpg[/img]



[img]https://farm4.staticflickr.com/3704/9352323913_bc8c7b747c_b.jpg[/img]

decide to change the cluster set up cant have it the other way, so my scrap yard cluster came in and I made a template out of paper then on aluminium. just need turn lights, VDO fuel guage, high beams and its ready to be put in after paint job.

that's not the oem cluster out my car ! I have it put away.
[img]https://farm4.staticflickr.com/3734/9369407614_bd202a0c7a_b.jpg[/img]


[img]https://farm4.staticflickr.com/3811/9366629505_d10b5d7ce4_b.jpg[/img]


[img]https://farm3.staticflickr.com/2871/9366630315_c6e1849c6f_b.jpg[/img]


[img]https://farm4.staticflickr.com/3731/9366631033_b0e8400541_b.jpg[/img]


test fit looks good
[img]https://farm4.staticflickr.com/3750/9369410912_7da1919aca_b.jpg[/img]

Flush AiM mounting looks great. Awesome build.

[QUOTE=Alliedforces86;3429076]Flush AiM mounting looks great. Awesome build.[/QUOTE]

ya way better this way for sure



























front bumper is painted and on, waiting from subaru for one more top rubber trim to finish it off.

intercooler pipes are going to be made next week ! very excited its all most done.


[img]https://farm4.staticflickr.com/3780/9371627089_ab84ff4514_b.jpg[/img]

sits a little funny needs a readjusting better.
[img]https://farm4.staticflickr.com/3711/9374403000_7b6920da09_b.jpg[/img]

I would like to thank Franz and his familia for all the hospitality while I was down in the USA !... I had a blast down there and all most didn't want to come home.



here we have Franz's amazing hand crafted one of a kind Leone intercooler piping that fits perfect and does a fantastic job keep the temps down and power up !

[img]https://farm6.staticflickr.com/5492/9586843211_716b1164fe_b.jpg[/img]


my new dash wired up by Franz, this time I can see and keep a eye on everything just in case something is not right.


[img]https://farm6.staticflickr.com/5459/9589640076_806eb2b5a7_b.jpg[/img]


Franz's Dyno Dynamics tuning tool.... that fan in the back with the red EVO rally bumper on it !!! that thing will suck you in and spit you out the other side if you get to close !..

[img]https://farm6.staticflickr.com/5478/9586847215_64cb980b1f_b.jpg[/img]



all sensors hooked up ready to rock and roll the proper way !....

[img]https://farm8.staticflickr.com/7333/9586846137_21b6fbfc72_b.jpg[/img]













so much eye candy OVER LOAD !


Franz's babys sided by side.... the EVO is just crazy !... its like a full blown race car and has EVERYTHING ! no joke !.. me I like the 86 Golf because I'm from the old school lol.

[img]https://farm6.staticflickr.com/5484/9587013407_0a7c267759_b.jpg[/img]



looks amazing under this Golf's hood !

[img]https://farm8.staticflickr.com/7408/9587022355_619a244b4c_b.jpg[/img]



this car was on the dyno getting all dialed in by Franz... this Porsche has a full blown carbon fiber wide body kit twin turbos and is packing 500hp and 2000lbs.... its freaking fast


[img]https://farm8.staticflickr.com/7405/9587015759_57011cfb73_b.jpg[/img]



and some other car's he's working on around the shop...

[img]https://farm6.staticflickr.com/5344/9589818564_f77ebae4f9_b.jpg[/img]

[img]https://farm3.staticflickr.com/2816/9589811988_00992aa0d3_b.jpg[/img]

[img]https://farm4.staticflickr.com/3772/9587018059_bc0d478b8f_b.jpg[/img]

Talk about a cool sleeper :P
only things that might give it away are the wheels haha

I cant imagine how many hours were put into this