WTT: Garrett GT35r For GT30R
 

Garrett GT35r. No major shaft play. No leaky seals. 5000 Miles on it.

4 bolt outlet
t3 flange
.70 AR

Just inspected by garrett.

There was some small damage on the impeller (nicks due to something getting sucked up (most likely something in the air :noidea:) Garrett rebalanced the turbo and gave her a clean bill of health.

Turbo was ran at 23 psi.

I just want a smaller turbo for my little 2.0.

Let me know guys. Willing to trade straight up.

[ATTACH]153028[/ATTACH]

[ATTACH]153029[/ATTACH]

[ATTACH]153030[/ATTACH]

what number were you putting out with this bad boy?

I wasnt running this turbo.

I am slowly trying to downsize to a smaller turbo =)

The owner was hitting 400+ with it

do u got an 3inch inlet for sale by any chance

no this was a rotated mount turbo

nice.. well good luck

thank you sir

Are you sure it's a .70 A/R? Typically the GT35's coming in .63, .82 and 1.06.

They do however pretty much have the .70 compressor cover on them.

Mike

bump

[QUOTE=GST Motorsports;2448210]Are you sure it's a .70 A/R? Typically the GT35's coming in .63, .82 and 1.06.

They do however pretty much have the .70 compressor cover on them.

Mike[/QUOTE]



yeah im looking at the compressor cover :tape:

Its the 1.06 hot side

model 714568-5001

[QUOTE=flatline;2448439]yeah im looking at the compressor cover :tape:

Its the 1.06 hot side[/QUOTE]

Ah the big dog, this turbo is good for 550whp on our dyno folks!! Great drag turbo!

Mike

comon mike i know you got a gt30r laying aronud =)

bump bump bumnp

to the ceiling.

someone wants some serious firepower under their hood!!!