Feeler: Freshly Painted Championship White Enkei NT-03+m 18x9.5 +40
 

SOLD... Please close thread.


Pictures of the wheels after I picked them up from paint:
[ame=http://www.flickr.com/photos/whatkicks/6893597450/][img]https://farm8.staticflickr.com/7185/6893597450_f648079e7c_b.jpg[/img][/ame]


And installed on my car. (Note, since my STI is my dd, I did drive on them in the rain, no damage or rashes etc. Also, because I know someone will ask, i'm running 255/35/18)
[ame=http://www.flickr.com/photos/whatkicks/6893603854/][img]https://farm8.staticflickr.com/7273/6893603854_136b7a0b03_b.jpg[/img][/ame]

5x114 :nooooooooooooooooooooo:


:Cry: :Cry:

[quote=lol vtec;3228040]5x114 :nooooooooooooooooooooo:


:cry: :cry:[/quote]

:( :(

oh man, why did i just have to buy a bike

might want to include that you need spacers to clear front brembos. im pretty sure the minimum is 10mm

Bolt pattern is 5x114 and yes you will need a 10mm spacer up front to clear the Brembo's. Thanks for reminding me ^

from the pic, i count 10 lug holes. are they dual-drilled?

clean glws

[QUOTE=eleanor|wagon;3228190]from the pic, i count 10 lug holes. are they dual-drilled?[/QUOTE]

Sorry no not dual drilled. It's just a design.

Did u roll ur fender? Just wondering

Yes. Nothing crazy though, front just somewhat pushed in for more clearance, rears has a very slight pull. If I stretched I wouldn't have to do much at all but I wanted to run 255 for more contact ;D

very tempting.. wishing they were 10.5 though..

[QUOTE=eleanor|wagon;3228190]from the pic, i count 10 lug holes. are they dual-drilled?[/QUOTE]
Pretty sure those holes are there if you are running spacers with lugs on them. Bump for some sick wheels. I have always wanted these wheels but I want to run a staggered offset setup(+27, +40)

[QUOTE=flat489;3228261]Pretty sure those holes are there if you are running spacers with lugs on them. Bump for some sick wheels. I have always wanted these wheels but I want to run a staggered offset setup(+27, +40)[/QUOTE]

I thought the same like how it was on my Te37's but it's not. There's only 1-2mm depth aha. Was going to do the staggered offset as well but didn't want the front poking more then the rear also wanted to be able to rotate wheels more easily.