FS: WC Lathe Werks Copolymer WRX Sphere black shift knob (won't get hot or cold)
#1
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2010
Location: Walnut Creek, California
Posts: 381
Car Info: 2011 WRX sedan
FS: WC Lathe Werks Copolymer WRX Sphere black shift **** (won't get hot or cold)
FS:
I'm selling my WC Lathe Werks Copolymer WRX Sphere shift **** that I had on my WRX. This shift **** is made out of copolymer which means it does not get hot or cold like metal ***** do. I used this shift **** in my car last summer and it never got hot at all. I also got the brass insert with the shift **** which was an additional $20 at the time.
This shiftknob is hand-made from solid acetal copolymer. This material is a hard plastic that will not absorb heat in the summer and won’t freeze in the winter like typical metal *****. This provides an extremely comfortable **** all year long.
This **** can be made with a custom-machined brass thread insert for an extra 60 grams of weight. This makes a significant improvement in shift feel, while also providing stronger threads which resist stripping better.
GENERAL SPECIFICATIONS:
Copolymer material will not get hot or cold!
2.0" diameter for comfortable size
100 gram weight for a good feel (without brass)
160 gram weight for an even better feel (with brass)
Smooth surface finish
Internal threading provides a quick screw-on installation
Boot lip under **** allows for shift boot to clip on. Keeps stock appearance
**** is drilled deep to sit lower than stock WRX ****!
below is what it looked like in my car with the kartboy short shifter
I'm selling my WC Lathe Werks Copolymer WRX Sphere shift **** that I had on my WRX. This shift **** is made out of copolymer which means it does not get hot or cold like metal ***** do. I used this shift **** in my car last summer and it never got hot at all. I also got the brass insert with the shift **** which was an additional $20 at the time.
This shiftknob is hand-made from solid acetal copolymer. This material is a hard plastic that will not absorb heat in the summer and won’t freeze in the winter like typical metal *****. This provides an extremely comfortable **** all year long.
This **** can be made with a custom-machined brass thread insert for an extra 60 grams of weight. This makes a significant improvement in shift feel, while also providing stronger threads which resist stripping better.
GENERAL SPECIFICATIONS:
Copolymer material will not get hot or cold!
2.0" diameter for comfortable size
100 gram weight for a good feel (without brass)
160 gram weight for an even better feel (with brass)
Smooth surface finish
Internal threading provides a quick screw-on installation
Boot lip under **** allows for shift boot to clip on. Keeps stock appearance
**** is drilled deep to sit lower than stock WRX ****!
below is what it looked like in my car with the kartboy short shifter
Last edited by xabre1200; 04-23-2012 at 11:28 PM.
#3
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2010
Location: Walnut Creek, California
Posts: 381
Car Info: 2011 WRX sedan
Thanks for the bump. Yeah it's pretty awesome for the summer or winter. Thinking about just keeping it for the summer since my aluminum **** I'm using right now is gonna be getting crazy hot in the day time. It was so nice coming back to my car and not getting burned by my shift **** :P
#5
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2010
Location: Walnut Creek, California
Posts: 381
Car Info: 2011 WRX sedan
Woops forgot the STI/WRX thread pattern were the same. The second picture is one of the stock pictures from their website. First picture is on my car.
Last edited by xabre1200; 04-16-2012 at 11:40 PM.
#6
Registered User
iTrader: (24)
Join Date: Jan 2007
Location: Walnut Creek/BayArea, CA
Posts: 1,831
Car Info: 2009 WRB WRX Sedan
This **** feels great and has a good weight to it. I used it for a little bit of time just to see how it felt.
here is the **** to palm ratio
here is the **** to palm ratio
Last edited by hwob90; 04-16-2012 at 11:18 PM.
#12
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2010
Location: Walnut Creek, California
Posts: 381
Car Info: 2011 WRX sedan
Ah thanks for clearing that up. Yeah this **** wouldn't fit well on the STI because of the boot collar that's designed for the WRX but the thread pitch would be the same for both WRX/STI.