02-07 WRX Stage 2 parts, Invidia Downpipe, Invidia Uppipe, Maddad midpipe, AccessPORT
Thread Starter
Registered User
iTrader: (17)
Joined: Dec 2006
Posts: 102
From: Pleasanton, CA
Car Info: 2002 WRX Wagon
02-07 WRX Stage 2 parts, Invidia Downpipe, Invidia Uppipe, Maddad midpipe, AccessPORT
All these parts are in San Ramon. I can meet near San Jose Airport as well. All prices are half off retail. Parts were used for two years and approximately 20,000 miles on my 2002 WRX. I went back to stock. PM me if you're intersted.
Invidia Divorced Wastegate Catted Downpipe - $250 (SOLD)
Description: Used for two years and approximately 20,000 miles. All Invidia downpipes feature a large 4 inch stainless steel bellmouth and full 3 inch piping. They sport a one-piece design, eliminating the need for the stock catalytic converter. In addition each Invidia downpipe can be bolted onto any invdia cat-back exhaust or the stock exhaust. This catted downpipe features a divorced wastegate. A metal piece where the downpipe meets the turbo separates the exhaust exiting the turbo from the exhaust exiting the internal wastegate which helps the exhaust flow more smoothly. Fits 02-07 WRX, and others.
Invidia Catless Uppipe - $60 (SOLD)
Description: Used for two years and approximately 20,000 miles. This Invidia catless uppipe is a direct replacement for the factory uppipe on 02-09 WRX's, and others.
Halfback Hybrid 3"/2.5" Intermediate Pipe - $125 (SOLD)
Description: Used for two years and approximately 20,000 miles. Hybrid 3"/2.5" Intermediate pipe for mating full 3" downpipes to factory 2.5" or performance 2.5" axleback exhausts. Build you own custom "Stealth" turboback by buying the downpipe of your choice and adding a Halfback pipe to allow it to mate with your factory axleback for a totally stock look while gaining most of the performance of a full turboback. You'll need to mate this with a full length 3" downpipe that stays full 3" with no 2.5" donut gasket tapers. A high quality flex section is part of this pipe to ensure proper stress relieft remains in your system sytem with the elimination of the factory donut gasket. This pipe stays full 3" up to about the last inch of pipe where it tapers to 2.5" and uses a standard 2.5" flange on the end that would mate with the factory axleback or performance 2.5' axleback section. Fits 02-07 WRX, and others.
Cobb AccessPORT 02-05 (Part # AP-SUB-001) - $300 (SOLD)
Description: Unmarried AccessPORT. Used when I got my WRX two years ago and just now to unmarry it. Been in packaging stored in my office for two years.
Invidia Divorced Wastegate Catted Downpipe - $250 (SOLD)
Description: Used for two years and approximately 20,000 miles. All Invidia downpipes feature a large 4 inch stainless steel bellmouth and full 3 inch piping. They sport a one-piece design, eliminating the need for the stock catalytic converter. In addition each Invidia downpipe can be bolted onto any invdia cat-back exhaust or the stock exhaust. This catted downpipe features a divorced wastegate. A metal piece where the downpipe meets the turbo separates the exhaust exiting the turbo from the exhaust exiting the internal wastegate which helps the exhaust flow more smoothly. Fits 02-07 WRX, and others.
Invidia Catless Uppipe - $60 (SOLD)
Description: Used for two years and approximately 20,000 miles. This Invidia catless uppipe is a direct replacement for the factory uppipe on 02-09 WRX's, and others.
Halfback Hybrid 3"/2.5" Intermediate Pipe - $125 (SOLD)
Description: Used for two years and approximately 20,000 miles. Hybrid 3"/2.5" Intermediate pipe for mating full 3" downpipes to factory 2.5" or performance 2.5" axleback exhausts. Build you own custom "Stealth" turboback by buying the downpipe of your choice and adding a Halfback pipe to allow it to mate with your factory axleback for a totally stock look while gaining most of the performance of a full turboback. You'll need to mate this with a full length 3" downpipe that stays full 3" with no 2.5" donut gasket tapers. A high quality flex section is part of this pipe to ensure proper stress relieft remains in your system sytem with the elimination of the factory donut gasket. This pipe stays full 3" up to about the last inch of pipe where it tapers to 2.5" and uses a standard 2.5" flange on the end that would mate with the factory axleback or performance 2.5' axleback section. Fits 02-07 WRX, and others.
Cobb AccessPORT 02-05 (Part # AP-SUB-001) - $300 (SOLD)
Description: Unmarried AccessPORT. Used when I got my WRX two years ago and just now to unmarry it. Been in packaging stored in my office for two years.
Last edited by Spede; May 8, 2012 at 01:03 PM.
Thread Starter
Registered User
iTrader: (17)
Joined: Dec 2006
Posts: 102
From: Pleasanton, CA
Car Info: 2002 WRX Wagon
Thread
Thread Starter
Forum
Replies
Last Post
duhrr
NorCal Classifieds
16
Nov 25, 2007 04:04 AM
duhrr
NorCal Classifieds
1
Nov 15, 2007 04:14 AM
scorp88
Used Aftermarket Car Parts For Sale
3
Sep 21, 2005 05:15 PM




