2002 WRX 10 sec car part out - built EJ207/PPG/Shell/Etc etc etc
So after owning the car for over 10 years, countless set-ups and tons of fun... I have decided to completely part out my WRBP 2002 WRX Sedan. I am looking to sell it all in 5 chunks. Longblock. Transmission. Turbo kit. Intake Manifold/FMIC set-up. Shell.
[B]First up is a fully built EJ207 longblock w/harness and ECU. Balanced and blueprinted.[/B] Block: -0 miles on new build -capable of 600+ whp and deep 10 sec passes -new build has new V.7 crank, new bearings, new rings ready to seat. -Eagle rods -Coated CP pistons -ARP headstuds -modded oil pump -new water pump -new timing belt -Cosworth timing belt guide -Perrin crank pulley (have stocker too) -Cusco Engine Mounts (+$50 for tranny mount) -Alternator -Power steering pump Heads: -0 miles -fully rebuilt with new guides and seals -gasket matched porting / V.7 Spec Big port castings -Kelford AVCS cams (278/272) -Supertech Inconel exhaust valves, 0.5mm oversized -Supertech SS intake valves, 0.5mm oversized -Titanium retainers -Dual valvesprings [SIZE="5"][COLOR="Red"]$4000[/COLOR][/SIZE] I prefer pick-up, but can arrange meet-up/delivery in and around the Baltimore /tri-state area. ---------------------------------------- [B]Next up I have a PPG 5spd Straight cut transmission.[/B] Ratios are perfect for a high power, high revving dragcar: -2000 miles on it -billet 1-2 and 3-4 shift forks -billet interlockers -fresh ring/pinion -Cusco transmission mount (+$50 w/engine mounts) [SIZE="5"][COLOR="red"][B][COLOR="Lime"]SOLD[/COLOR][/B][/COLOR][/SIZE] I prefer pick-up, but can arrange meet-up/delivery in and around the Baltimore /tri-state area. ---------------------------------------- [B]HTA35R rotated turbo kit to include:[/B] -rebuilt 35R converted to an HTA35R, 0 miles on rebuild -GT Spec UEL Headers -GT Spec Uppipe modded for external wastegate -Tail 44mm wastegate and dumptube -TXS Uppipe adaptor -TXS downpipe -full titanium cat back w/titanium muffler (banged up a little, but sounds/works great, looks great on car) -TXS MAF housing [SIZE="5"][COLOR="red"]$2500[/COLOR][/SIZE] I prefer pick-up, but can arrange meet-up/delivery in and around the Baltimore /tri-state area. ----------------------------------------- [B]NEW Custom TXS Intake Manifold w/70mm Ku Engineering throttle body[/B] -will include NEW gasket matched ported TGV housings (modded to except either top feed or side feed injectors -modded new gen WRX injectors (flow 900-1000cc's). -Aeromotive FPR -NEW Aeromotive Fuel rails -Will include stock and lighlty modded WRX OEM TB's as well -All my intercooler piping and banged up but 10 sec capable MRT frontmount core, all couplers. -TXS RFL bov [SIZE="5"][COLOR="Red"]$1500[/COLOR][/SIZE] I prefer pick-up, but can arrange meet-up/delivery in and around the Baltimore /tri-state area. ------------------------------------------ [B]2002 WRBP WRX Sedan Shell[/B] w/80,000 miles on the body. No spoiler. Will come with TONS of parts including the following: -full interior -GT Spec 3 piece subframe (and OEM subframe) -DSS aluminum driveshaft (and OEM driveshaft) -5 gallon fuel cell -Aeromotive A1000 fuel pump -black powder coated WRX wheels (excellent condition) -gunmetal painted 2.5RS wheels (needs repainted) -STI aluminum control arms (and oem control arms) -Goodridge stainless brake lines -JDM STI gauge cluster w/shift light -TXS DTEC boost controller w/Gameboy -TXS Knock light/shift lighy -TXS Tuner Wideband -Blitz Power Meter iD -Blitz FATT (turbo timer) -SS clutch line -Billet dog bone -GT Spec Rear Diff mount -Urethane diff lockout mounts -Urethane Power Steerting mounts -additional Power Steering rack -additional brake booster w/master cylinder -KYB AGX 4-way adjustable struts w/Perrin springs -Hochkis front and rear hollow sway bars w/mounts -STI short shifter w/urethane bushings -MOMO shift knob -MOMO shifter boot -Blue STI carpet -Black STI flootmats, FR/RR -TXS UTEC Delta -Extra half shafts (1 set of front, 1 set of rears) -OEM radiator -WRX flywheel -STI flywheel -Cusco flywheel -3 discs (two brand new, ACT and clutchmasters) -3 pressure plates (1 new) -new release/pilot bearings -2004 taillights -clean title -JDM fenders w/sidemarkers -aluminum dead pedal -STI front grill [SIZE="5"][COLOR="red"]$2000[/COLOR][/SIZE] Pick-up only --------------------------------------------- Prices are firm, but any reasonable offer will be considered. Paypal or cash only. I will consider combo buys with a $500 discount. For example: Longblock ($4000) with trans ($3000) = $7000 - $500 = $6500 Turbo kit ($2500) + intake maniold stuff ($1500) = $4000 - $500 = $3500. Entire drivetrain discount: longblock ($4000) + trans ($3000) + turbo kit ($2500) + intake mani set-up ($1500) = $11,500 - $2500 (discount) = $9000 EVERYTHING discount: ala carte total = $14,500 - $3500 (discount) = $11,000 Serious inquiries only. Photos upon request. There are some things I am sure I have forgot, as I remember, I will be editing the post. [email]dstanley_21014@yahoo.com[/email] Thanks for looking, Doug |
5 Attachment(s)
[ATTACH]116943[/ATTACH]
[ATTACH]116944[/ATTACH] [ATTACH]116945[/ATTACH] [ATTACH]116946[/ATTACH] [ATTACH]116947[/ATTACH] More pics available upon request. Thanks Doug |
Transmission sold bump :)
Doug |
All times are GMT -7. The time now is 03:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands