GC8 headlight Mod
Thread Starter
Registered User
Joined: Nov 2002
Posts: 55
From: Port Moody, BC
GC8 headlight Mod
I am currently doing a search on the mod of black out the "rim" inside the headlight, but I can't find any instruction for the mod.
Is it done with similar instruction as the 02 headlight mod?
Andy
Is it done with similar instruction as the 02 headlight mod?
Andy
Guest
Posts: n/a
here is a pic of mine...
and here are my instructions...
Posted: Nov Sat 23, 2002 8:55 pm Post subject:
--------------------------------------------------------------------------------
preheat oven to 225....5-7 minutes in there pry the apart..dont forget to remove the metal clips before hand, as weel as the bulb and rubber boot....start prying them from the insides, ie part that touches the grill....its easier....the unscrew the frame and paint with high temp spray paint.....let that dry and redo backwoards...to be on the safe side you might also want to use some silicone///
_________________
Andres C
and here are my instructions...
Posted: Nov Sat 23, 2002 8:55 pm Post subject:
--------------------------------------------------------------------------------
preheat oven to 225....5-7 minutes in there pry the apart..dont forget to remove the metal clips before hand, as weel as the bulb and rubber boot....start prying them from the insides, ie part that touches the grill....its easier....the unscrew the frame and paint with high temp spray paint.....let that dry and redo backwoards...to be on the safe side you might also want to use some silicone///
_________________
Andres C
Thread
Thread Starter
Forum
Replies
Last Post
Mobutusan
Engine/Power - EJ20T (pre-2006 WRX and JDM)
9
Apr 2, 2008 11:38 PM
T-Will
Sacramento & Reno
42
Jun 20, 2007 09:24 PM
