CA: 2004 WRX STi Java Black Pearl
 

[B][U]This is my bro's car, but I can relay any information or questions directly to him![/U][/B]
Craigslist ad here:
[url=http://sfbay.craigslist.org/sby/cto/4015587776.html]2004 WRX STI Java Black Pearl![/url]

Copy & pasted:
Hello there,

Offering my 2004 STI for sale finally. It has been a great ride with this car; we have been through a lot together ha. This car has always been garaged, and has been in California the majority of its life. This car has been modified with two goals in mind; reliability, and efficiency.
Eight thousand miles ago I was on my annual trip to MN when my oil pressure started to drop. I was extremely concerned about this so I took it to MAP for diagnosis. They said they heard rod knock and I should have it rebuild immediately. I had asked them if they could do it, but they were a month out on work. The decision was then made to ship it back to CA and have it rebuilt at GST Motorsports. When I had him estimate the build, I was shocked what a stock motor would cost vs a full build; naturally I went with the full build and opted to do it right. When GST pulled the motor apart they found that the oil pickup tube was sitting in the bottom of the oil pan. At that point I was pissed that I found that Subaru made a colossal mistake brazing the oil pickup tube to the base flange…..
I am glad I chose to go with mike for engine build because he built a very solid powertrain for the car.
When the rebuild was belts s done, I had everything replaced with new. Water pump, timing belt, thermostat, accessory belts, all pulleys and idlers, etc.
This car needs a new home so I can move on to my next project. I’m thinking something in the rotary side of things.
The title is clean and I have it in hand.

OK on to the goods 
Asking price 26,000 pretty firm
Mileage on motor 8,000
Mileage on chassis 80,000
Powertrain Mods:
• New EJ257 Block
• 09 Nitrided crank
• Manley Rods
• CP 100mm pistons
• Pistons were coated with thermal barrier on heads and moly coated skirts
• ACL bearings
• ARP studs
• Balanced rotating ASSY to 10k PRM
• Heads were cnc machined for 1mm overbore on the valve seats
• Titanium valve springs and retainers
• BC 280 cams
• Cosworth Composite TGV deletes top
• Aeromotive fuel rails
• IDC 2200cc injectors
• Grimmspeed Port and polish intake manifold ceramic coated black with gold heat reflecting tape on top of that
• Gimmick 3” inlet pipe (changed because APS did not fit)
• Blouch DOM 3 XTR ceramic coated 10cm exhaust housing
• Perrin equal length headers
• Invidia DP with custom bellows for EWG
• TIAL 44MM EWG
• Madadd CAT back exhaust
• Perrin FMIC
• Perrin blow thru boost tube
• Perrin short ram intake
• TIAL BOV
• Custom AOS
• Aeromotive Fuel pressure regulator
• Walbro 255 fuel pump
• Tuning done by GST and EQ tuning

Chassis Mods:
• KW V3 suspension with external reservoirs
• Every bushing on the shifter linkage was replaced with kart boy and TIC poly bushings
• Whiteline anti lift kit
• Whiteline 24mm adjustable front sway bar
• Whiteline 24mm adjustable rear sway bar
• Whiteline adjustable rear lateral links
• Whiteline differential bushings
• Whiteline camber compensator ball joints and bushings
• Cusco engine mounts
• Cusco transmission mounts
• I have a set of performance friction PF01 pads for the car as well as hawk hpf1’s
• Stoptech rotors all the way around
• Braided SS lines for brakes
• Workmeister S1 rims 17x8.5 +55
• 255/45/17 dunlop direza Z1 starspecs 500 miles on the tires
• Pro-sport gauges (oil, A/F, EGT)
• Greddy turbo timer
• Black alcantara intereior (headliner, ABC pillars)
• Dynomat everything
• Kenwood indash touch screen radio system
• Cobb access port with pump gas and E85 tunes!!
• KS tech hood scoop delete (I have the hood scoop still)
- Alpine Amp for all four speakers

I am interested in Mazda FD's and/or 25-26 mazda miata's.
Feel free to contact me for any questions, concerns, or any more pictures.
My name is Jimmy Casey and you can contact me at (612)-916-0227.
Thanks for looking!

On to pics:
[attach]211844[/attach]
[attach]211845[/attach]
[attach]211846[/attach]
[attach]211847[/attach]
[attach]211848[/attach]
[attach]211849[/attach]
[attach]211850[/attach]
[attach]211851[/attach]
[attach]211852[/attach]
[attach]211853[/attach]
[attach]211854[/attach]
[attach]211855[/attach]
[attach]211847[/attach]
[attach]211857[/attach]
[attach]211858[/attach]

Pictures are too big. Gotta resize them!

Fixed!!!

What power did it make?

To my memory it was tuned at GST on e85 making approximately 430whp. I will confirm with my brother tomorrow.

bump.

[QUOTE=KartRacer3;3445656]bump.[/QUOTE]

would u sell the rally armor separately =)

How much are you asking for the car?

I love the java black. Glws!

[QUOTE=Xlagman92;3447776]would u sell the rally armor separately =)[/QUOTE]
Not as of now, sorry!

[QUOTE=4_wheelin_subi;3449974]How much are you asking for the car?[/QUOTE]
As listed in the first post $26k obo-possible pending atm.

[QUOTE=geekxism;3452517]I love the java black. Glws![/QUOTE]
Thanks! It truly is a great color; Aspen white is my favorite though haha.

Bump. Car was rebuilt yet again and tuned at EQ tuning this time around. No making approximately 460whp 430 tq!