The "What did you do to your car today" Thread!
08-26-2012, 09:46 AM
#34
Registered User
iTrader: (15)
Join Date: Jan 2012
Location: gone hunting, be back maybe
Posts: 3,836
Car Info: 12Teens crazy 4 me
Originally Posted by FRAWSTI
theoutbackdream you should write up a DIY and show pics of it wired up.
although i didnt hardwire since i already have my phone charger hard wired.
08-26-2012, 10:58 PM
#35
Registered User
iTrader: (14)
Join Date: May 2008
Location: Bay Area, CA
Posts: 2,597
Car Info: hopes and dreams
Pulled all the lining in the trunk, cleaned everything out. Sanded down the paint and sprayed a sound deadening material that is similar to truck bedding in my STI.
08-27-2012, 10:33 AM
#40
VIP Member
iTrader: (7)
Join Date: Dec 2002
Location: Stockholm
Posts: 7,441
Car Info: 2018 Golf R Variant
I took the day off to do exactly that today. It's super super easy. Last time I did it without the kit (on my 2003 WRX I had before). This time, I actually got the V1 hardwire kit because I am lazy, and I want to also use the concealed display.
Anyway, you pop out the map light thing (pry out the lens with a flat screwdriver, then two screws hold it to the ceiling) and there is a plug just sitting there for the powered rear view mirror (my car doesn't have this, so I am using that connector for power). You can use a volt meter to verify that you have ground and a switched 12v, and then use the supplied connectors or make your own. It's a great project to start with because it's pretty easy, and you can't really hurt yourself or destroy anything.
Anyway, you pop out the map light thing (pry out the lens with a flat screwdriver, then two screws hold it to the ceiling) and there is a plug just sitting there for the powered rear view mirror (my car doesn't have this, so I am using that connector for power). You can use a volt meter to verify that you have ground and a switched 12v, and then use the supplied connectors or make your own. It's a great project to start with because it's pretty easy, and you can't really hurt yourself or destroy anything.
08-27-2012, 03:23 PM
#43
Registered User
iTrader: (15)
Join Date: Jan 2012
Location: gone hunting, be back maybe
Posts: 3,836
Car Info: 12Teens crazy 4 me
I took the day off to do exactly that today. It's super super easy. Last time I did it without the kit (on my 2003 WRX I had before). This time, I actually got the V1 hardwire kit because I am lazy, and I want to also use the concealed display.
Anyway, you pop out the map light thing (pry out the lens with a flat screwdriver, then two screws hold it to the ceiling) and there is a plug just sitting there for the powered rear view mirror (my car doesn't have this, so I am using that connector for power). You can use a volt meter to verify that you have ground and a switched 12v, and then use the supplied connectors or make your own. It's a great project to start with because it's pretty easy, and you can't really hurt yourself or destroy anything.
Anyway, you pop out the map light thing (pry out the lens with a flat screwdriver, then two screws hold it to the ceiling) and there is a plug just sitting there for the powered rear view mirror (my car doesn't have this, so I am using that connector for power). You can use a volt meter to verify that you have ground and a switched 12v, and then use the supplied connectors or make your own. It's a great project to start with because it's pretty easy, and you can't really hurt yourself or destroy anything.
Interesting... Did your lighting get affected?
Reason i ask is because i hardwired directly to the Fuse box.
09-06-2012, 10:48 AM
#45
Registered User
Thread Starter
Been busy; Trans fluid, diff fluid, oil pickup tube, spark plugs, 3" downpipe, tune ecu, fixed air in Powersteering fluid by replacing pump inlet o-ring, fixed annoying seat belt screach, plasti-dipped the silver center console trim. All on the STI.