Accessport help!
 

Today i got my cobb accessport in the mail i installed my accesport to my ecu and changed my map to Stage1 ACN91 Octane. everything worked fine but when i went to start my car after finishing the download i wouldnt start. i had a friend try and jump me and it still wouldnt work. im not sure whats wrong if its my battery or something to do with the ecu. Any advice would be greatly appreciated!

Flash back to base and see if it starts.

well when i switch maps it sometimes doesnt start on the first crank. Do you still have your green testers connected?

Flash back to stock if it works make sure your AP has the latest firmware including latest maps... Thats some scary news!

Make sure you unplugged the green connectors after the flash. If it still doesn't start, try flashing back to stock.

-- Ed

[QUOTE=EQ Tuning;3387097]Make sure you unplugged the green connectors after the flash. If it still doesn't start, try flashing back to stock.

-- Ed[/QUOTE]

the green connectors are unplugged. when i try to uninstall it stays at the "verifying that the ignition switch is on" screen. it wont let me uninstall??

You may have a bricked ecu? Happened to me at eq a few years back. Is it just totally frozen on those screens? Those greens must be plugged when flashing though. And removed when driving.

[QUOTE="Nogledome;3387108"]

the green connectors are unplugged. when i try to uninstall it stays at the "verifying that the ignition switch is on" screen. it wont let me uninstall??[/QUOTE]

I've noticed that my access port won't communicate with the ecu when the battery is low, it would just keep asking me to cycle the ignition. get your battery charged and try again, perhaps?

Sent from my Nexus 4 using i-Club

Try posting on the Cobb forum, they are pretty helpful.

When you turn the key to the full on position does the CEL come on?

[QUOTE="w0ng3r;3387116"]

I've noticed that my access port won't communicate with the ecu when the battery is low, it would just keep asking me to cycle the ignition. get your battery charged and try again, perhaps?

Sent from my Nexus 4 using i-Club[/QUOTE]

Bad battery will affect it too. +1

just replaced the battery and it still isnt starting. i need help!

When green connectors are attached and ignition is on, do the fans and relays cycle? If not, your ECU is bricked and you'll need to contact Cobb and send it in to be fixed.

Thanks
-- Ed

[QUOTE="EQ Tuning;3387218"]When green connectors are attached and ignition is on, do the fans and relays cycle? If not, your ECU is bricked and you'll need to contact Cobb and send it in to be fixed.

Thanks
-- Ed[/QUOTE]

Or tactrix can unbrick too. But if your access port is married. Cobb for sure.

the fans arnt cycling. im not sure about the relays?