|
Author
|
|
inveSTigator
Registered User
Registered: November 2004
Location: Central TX
Posts: 31
|
|
Review Date: Fri March 25, 2005
|
Would you recommend the product? Yes |
Price you paid?: $379.00
| Rating: 10
|
|
Pros:
|
Apparent high quality just by looking at it. Outstanding welds. Excellent fitment. No downsizing at flange, full 3\"
|
|
Cons:
|
Heavy, but required due to the quality of the metal used. No Helix sticker in the box. : (
|
|
Great, high quality product. No issue with fitment, bolted right up. Good power gain when fitted with 3\" Catback. No excess engine noise as some have stated, but slightly louder turbo spool. No boost creep. No cels! Came w/mech. cel fix from Gruppe-S.
|
|
|
|
deegan42
Registered User
Registered: May 2004
Posts: 70
|
|
Review Date: Wed May 18, 2005
|
Would you recommend the product? Yes |
Price you paid?: $400.00
| Rating: 10
|
|
Pros:
|
Stainless, bellmouth, power
|
|
Cons:
|
none
|
|
I had this installed with a gutted uppipe. I would have done the install myself but the car was bought from my uncle in NY so after 30 thousand miles through snow and salt all the pipes were fused together. I had to get all new gaskets and a new o2 sensor because the old one wont come out of the midpipe. I would recomend this DP to anyone. The highflow cat does not take out much power. I would buy helix everytime.
|
|
|
|
|
Sti"izzle"
Registered User
Registered: December 2004
Location: Chico, Ca
Posts: 162
|
|
Review Date: Sat August 6, 2005
|
Would you recommend the product? Yes |
Price you paid?: $300.00
| Rating: 10
|
|
Pros:
|
Improves HP, Turbo Spools Quicker, Has Cat
|
|
Cons:
|
NONE!
|
|
Improves turbo spoolup, and hp. Great Look. Legal because of cat! While some people have problems with boost creep, and check engine lights, the high flow cat helps just enough to erase most of these problems. Awesome product, but pricey unless you get it used.
|
|
|
|
|
rexmaster
Registered User
Registered: July 2005
Location: lake county, IL
Posts: 15
|
|
Review Date: Tue March 21, 2006
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
catted, high quality finish, hp
|
|
Cons:
|
$$$, had to get the right size bolts
|
|
It came with gaskets(dp to turbo and dp to catback) and bolts/nuts/washers to mate with catback. The bolts were too thick for Evo2 flange so, I used 10 mm bolts, nuts and washers instead. No fitment issues with Evo2. It seems like it's meant for each other. The noise level is almost the same as stg 1 with Evo2 alone.
|
|
|
|
|
tamashi523
VIP Member
Registered: April 2004
Location: 650/707 Kick'n it w/b&n Krew
Posts: 1254
|
|
Review Date: Sat January 6, 2007
|
Would you recommend the product? Yes |
Price you paid?: $300.00
| Rating: 8
|
|
Pros:
|
its got a cat
|
|
Cons:
|
none so far
|
|
hey i have no leaks with my dp plus i won't get a 2000k ticket because I don't have a cat. This is one of the best dp on the market guaranteed.
|
|
|
|
|
mgb04
Registered User
Registered: January 2006
Location: newark, EBAIC
Posts: 1027
|
|
Review Date: Thu February 15, 2007
|
Would you recommend the product? Yes |
Price you paid?: $306.00
| Rating: 10
|
|
Pros:
|
good quality, great gains, no smell
|
|
Cons:
|
pricey
|
|
it's a bit more expensive than going catless, but i didn't want the smell, and with this dp i don't have that problem. gains are great and quality is top notch.
|
|
|
|
|
beermesf
Registered User
Registered: March 2007
Location: San Francisco
Posts: 10
|
|
Review Date: Sun January 13, 2008
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 9
|
|
Pros:
|
Craftmanship, flow and fitment
|
|
Cons:
|
A bit heavy but that is a good thing I suppose, there was no exhaust fumes detected from inside the cab.
|
|
Great firment to perrin dual tip catback. This dp looked sooo good I wish it was more visible. I did install a heat shield on it at its closest point to heatshield just as an insurance. I would highly recomend this, I do believe it is a good bang for the buck and well priced considering the other options.
|
|
|
|
|
;)
;)
;)
