EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force by controlling a motor installed in the shock absorber while being seated in the driver's seat. Since the damping force can be manually controlled with ease to meet different situations, the driver can enjoy variations in the suspension setting.
EDFC is developed based on the following concepts:
1. Easily controlled from the inside
To control the damping force, the driver does not need to raise the hood or take off rear interior parts such as the speaker board or rear seat. All a driver is required to do is simply operate a button while being seated in the driver's seat.
According to the marketing research we have carried out, EDFC is always ranked high on the 'want list'. Therefore, it has grown from overwhelming customer demand, specifically from requests by customers who have purchased damping-force-control-type shock absorbers, or who intend to purchase shock absorbers made by TEIN Inc.
2. Memory contents easily recalled
EDFC can store in its memory up to three types of damping force levels which have been set up according to various situations, and is equipped with a memory recall function. With the touch of a button, the driver can set the damping force level to his/her preference in various modes such as a normal driving mode when going out with family, a sports mode when enjoying a winding road alone, and a cruising mode when driving on a freeway. Moreover, pushing the button for more than two seconds can easily change the stored memory.
3. Compact in size
We made it compact in size, equivalent to 1/4 DIN, so that it can be installed in a position where the driver can easily operate in the driver's seat.
4. Installed in a wide range of vehicles
In the future, we will develop shock absorbers which will be equipped with the EDFC. There are some vehicle types, however, for which the EDFC cannot be installed due to problems such as narrow clearance. As for shock absorbers already purchased by customers previously, we will confirm the installation.
5. Reasonable Price
Function of EDFC
1. Damping force control function (16 levels / 32 levels)
Our damping-force-control-type shock absorbers normally have a built in damping force control function for 16 levels. This function controls the damping force by adjusting the rate of oil flow in the bypass through raising and lowering the damping force control needle built in piston rod for 16 levels. In the EDFC, this function is performed by a stepping motor installed on the top of piston rod, realizing a 16-level control, the same as in the manual control. Moreover, the operation by the controller with a decreased rotation angle has realized a finer adjustment of a 32-level mode in the same control range. The damping force for the front and rear wheels can be separately controlled, and the right and left wheels are simultaneously controlled.
2. Damping force level maintaining function
An EDFC switch is connected with the key position of the vehicle, the same as in general car audio components. If the EDFC power switch is continuously turned on, the EDFC can store in memory the click position setting when the driver gets out of the car and the key switch is turned off. Thus, when the engine is restarted, he/she can drive using the same setting. All memory contents are deleted when the EDFC power switch is turned off. The electric current to maintain memory is as slight as the current necessary for a standard equipment clock, and there is little possibility of a dead battery.
4. Damping force level memory function
It is equipped with a function to store in memory three settings of the damping force. The level setting in memory can be maintained even if the engine is turned off. The memory contents can be recalled with the touch of a button. Moreover, the stored memory contents can be easily changed by pushing the button for more than two seconds.
5. Damping force level resetting function
After the EDFC is installed, the driver will put it into a return-to-origin mode by rotating the motor in the clockwise direction when the power is turned on. With this operation, the controller can recognize the origin of the damping force control needle. The EDFC is equipped with a function to execute the return-to-origin mode compulsorily in the following occasions: in the case of installation or detachment of the EDFC, or when the control level is changed from 16-level to 32-level, or when the level displayed is different from the actual one due to external and mechanical reasons. This operation is not necessary in the normal driving, however. Turning on the main power again after turning it off can reset the damping force level. At this time, the memory contents are also reset.
6. Self-checking/warning function
In the case where the EDFC does not function correctly (due to an overcurrent or detached wires, etc.), all three memory buttons will blink red with an alarm sound and an error indication displayed, and the driver can confirm the position of the malfunctioning motor on the screen.
7. Volume/brightness control function
The beep sound volume while operating the EDFC can be set at three levels and can also be put into a silent mode. It is also possible to adjust the brightness of the display at three levels. This adjustment is connected with the power source for lamps, and it functions when the dimmer function is in operation at night.
8. Mis-operation preventive function
The EDFC is equipped with a lock mode, which prevents mis-operation. The 'key' mark is displayed and all operations become impossible including turning the power on and off. It is useful when the driver allows another driver to drive an EDFC-equipped vehicle.
Author
4XREX Registered User
Registered: November 2002 Location: San Jose, CA Posts: 1054
Review Date: Mon October 20, 2003
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 9
Pros:
easy to install
Cons:
none
If you have Tein Flexs this is an easy way to adjust your shock from the drivers seat with the push of a button. They are very helpfull if u have a sedan and dont want to remove the rear seat to make adjustment to your shocks.
WRX-Zero Registered User
Registered: December 2002 Location: Hawaii Posts: 2596
Review Date: Thu November 20, 2003
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 9
Pros:
Installation
Cons:
The EDFC is great for adjusting Tein Flex or Superstreet coilovers at the push of a button. 3 memory buttons store driver defined dampening settings. LCD screen is hard to read during the day.
gpatmac VIP Member
Registered: November 2002 Location: Lastweek Lane - Bloomington, IN Posts: 10111
Review Date: Thu July 8, 2004
Would you recommend the product? No |
Price you paid?: None indicated
| Rating: 8
Pros:
Simple ride quality adjustment, obvious bling
Cons:
obvious bling, expensive amenity
For what it is intended to do, it is a good product and is obviously an eye catcher (both a good and bad thing...depending on what neighborhood you live in.)
Essentially, if I didn\'t get such a good deal on the package (Flex\'s and EDFC for $1300), I wouldn\'t have bought the EDFC. I would much rather spend the money for one on something more worthwhile and have to suffer through adjusting my ride quality/dampening/judder manually.
------------------------------ Airborne Ranger, Airborne Ranger where have you been?
Deep into Baghdad and back again.
Paul@dbtuned
Registered: November 2002 Location: The evil eye of Toro sees all! Posts: 5953
Review Date: Wed June 29, 2005
Would you recommend the product? Yes |
Price you paid?: $350.00
| Rating: 9
Pros:
Ease of damper adjustment. Allows me to keep Mrs Oaf happy when she\'s in the car. Obvious bling factor
Cons:
Price should be around $250, not $350.
I like my ride on the stiff side, Mrs Oaf likes it soft. This little box allows her to set the ride to her level very easily.
Instructions are very easy to understand & follow; just read them through a few times before starting.
Save this mod for when you got some extra cash laying around.
------------------------------ "The bitterness of poor quality lasts much longer than the sweetness of low price."
dbtuned
1250 Plumber Way
Roseville, CA 95678
916.791.4900
Powered by: ReviewPost PHP vB3 Enhanced Copyright 2006 All Enthusiast, Inc.
