 i-Club |
|
|
|
|
>
|
>>
|
|
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
$198.75
|
9.6
|
|
|
|
|
|
supersize
|
|
Description:
|
The Défi Link gauges are like other electronic gauges in that they offer peak hold, 2 minute memory playback, and user-selectable warning functions. But only the Défi gauges use a daisy chain wiring system, and as far as we know only the Défi gauges are available in English units. The Défi system is the only one we know of that offers modular external warning lights for any gauge. Plus, the gauge selection is unsurpassed.
Daisy chain gauge wiring makes install a snap. Run your sensor wires to the control box. Run ONE wire from the control box to one of the gauges. Then all you have to do is hook each additional gauge to any other gauge!
The gauges themselves use stepper motor technology to drive the needles. There's no mechanical link, so the meters are reliable and can be installed at any angle. And the stepper motor means the gauges are both light and small in size -- 52mm gauges are only 1 3/5" deep!
Each gauge has its own LED warning light, and the threshold level for that light can be set from the control box independently of the other gauges.
The modular warning light can be attached to ANY Défi Link gauge for a "shift light" style alert.
To run the Défi Link system you need the control unit plus at least one gauge.
|
|
|
|
|
Author
|
|
SilverScoober02
VIP Member
Registered: October 2003
Location: Detroit, Where the weak are killed and eaten...
Posts: 1966
|
|
Review Date: Wed July 21, 2004
|
Would you recommend the product? Yes |
Price you paid?: $225.00
| Rating: 9
|
|
Pros:
|
Opening sequence, stepping motor, beautiful gauge
|
|
Cons:
|
price
|
|
These gauges are beautiful. They look so nice with the WRX interior lighting scheme and they are second to none in quality and precision. Would definately recommend
|
|
|
|
j*bishop
Registered User
Registered: April 2004
Location: west of teh mississippi
Posts: 390
|
|
Review Date: Thu October 21, 2004
|
Would you recommend the product? Yes |
Price you paid?: $180.00
| Rating: 10
|
|
Pros:
|
Opening sequence, beautiful gauge, very very close match to 04 cluster green lighting.
|
|
Cons:
|
None
|
|
Paid $180 shipped. Love this guage!! Purchased it along w/the autometer cluster pod.
|
|
|
|
|
namakemono
Registered User
Registered: September 2003
Location: 残念
Posts: 4438
|
|
Review Date: Fri March 18, 2005
|
Would you recommend the product? Yes |
Price you paid?: $195.00
| Rating: 10
|
|
Pros:
|
good reading, matches interior
|
|
Cons:
|
|
|
great product. the install was smooth thanks to my friend.
it is the emperial unit, which reads psi and not bar.
love everything about it, well maybe not the price, but it is great quality.
|
|
|
|
|
WarHammer
Registered User
Registered: November 2006
Location: (south of) Rockford, IL
Posts: 28
|
|
Review Date: Thu December 7, 2006
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 9
|
|
Pros:
|
best meters I've used, match to WRX dash, good choice period
|
|
Cons:
|
wish the illumination would adjust like the BF meters
|
|
Rated as a 9 but should be a 10 (I never rate anything at the top though)
Wanted a boost meter for my 2006 WRX ltd. In past experiences I've always liked Defi meters best over Autometer and other junk. Although this was an expensive direction to take for only a single boost meter it is still worth every penny to me going with Defi.
In this case the Link series matches the WRX cluster very well. I wanted an imperical meter (reading in psi instead of bar/kPa/etc. I just wish the Links had the ability to dim/brighten the illumination similar to the BF series. The Link illumination is brighter than the brightest WRX cluster setting. Still looks good though.
The Link meters do not come with any meter cup or mounting fitting...in comparison the BF series do come with these parts. I had to purchase these items separatly to ensure a clean install. The optional fitting mount with the rubber isolator pad is much better than the stamped steel mount fitting that comes with the BF series. I mounted this on the right edge of the steering column.
I used the Subaru oem meter pack wire harness to supply my PWR, PWRign, GND, and PWRillum. Ran all the wires cleanly through the center console and to the Control Unit mounted in the compartment.
My costs:
52mm link imperical black faced $179
Contol Unit v2 $99
Defi meter cup and optional fitting mount $40
Subaru oem meter pack adapter harness $40
TOTAL $370
|
|
|
|
|
Honuboi79
Registered User
Registered: October 2004
Location: Waialua
Posts: 83
|
|
Review Date: Sat December 23, 2006
|
Would you recommend the product? Yes |
Price you paid?: $195.00
| Rating: 10
|
|
Pros:
|
Great gauges, looks awesome
|
|
Cons:
|
none
|
|
Great gauges, easy to read, basic readings....... all around great product
|
|
|
|
|
|
Powered by: ReviewPost PHP vB3 Enhanced
Copyright 2006 All Enthusiast, Inc.
All times are GMT -7. The time now is 03:26 AM.
|
