EVC PRO
The EVC PRO is for professional use and installation only. Designed for highly tuned vehicles and race applications, the EVC PRO is adjustable up to 3.0Kpa (43.51psi) and incorporates all the functions of the EVC IV along with additional race inspired features. The EVC PRO takes input from the vehicles ECU and sensors to allow for adjustments to boost levels and characteristics to enhance performance. Boost curves can be programmed to variables such as, engine rpm and throttle position or vehicle speed. For example, when the vehicle begins to accelerate, boost levels will be at a preset level. As the vehicle gets into higher rpm range, the EVC Pro can be programmed to raise the boost level as the vehicle’s speed increases. This would limit lower rpm wheel spin while maintain full power potential at the higher RPMs. A built-in atmospheric pressure sensor (ATM) provides enhanced consistency in boost pressure regardless of various atmospheric conditions.
EVC Pro features
Adjustable up to 3.0bar (43.50psi)
Throttle position, engine rpm, vehicle speed inputs
5 RPM settings from 500-12,000 RPM in 100 RPM increments
5 Throttle position settings between 0-100% in 1% increments
5 Speed settings from 1-300 KPH in 1% increments
Atmospheric Pressure Sensor function (ATM)
Digital throttle position percentage and RPM/Speed display
Real time Digital Boost and Vacuum display
Liquid Crystal Display Screen
High and Low Boost Preset Levels
Scramble Boost feature
External Scramble Boost Trigger available
Visual and Audible overboost warning feature
Internal and External wastegate applicable
Precision “closed-loop” boost regulating stepping motor
Fuzzy Logic Programming will learn natural boost curve and optimize it.
Flash Memory
Dimensions:
EVC Headunit- 112mm (W) X 25mm (H) x 84mm (D)
EVC Stepping Motor- 58mm (W) X 50mm (H) X 48mm (D)
Powered by: ReviewPost PHP vB3 Enhanced Copyright 2006 All Enthusiast, Inc.
