Higher flow rate, keeps the car cooler and helps in your power performance.
18 fins per inch and 100% TIG welded.
Made in Australia.
Twin core design.
Author
STIdevildog Registered User
Registered: December 2004 Location: Peninsula Posts: 421
Review Date: Sun May 28, 2006
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 9
Pros:
looks great, better cooling, no more plastic top & bottom tanks
Cons:
very slight modification needed for stock fans to fit
Installation was quite fast after you manage to get the stock unit out. This radiator loses the main radiator cap that is directly on the radiator. Fill up time took a long time but no big deal. You will have to buy a longer radiator overflow hose that goes from the secondary coolant reservoir hose to the stock coolant overflow tank.
The modifications for the stock fans to fit require some wire cutters or a file. Not sure if this is for everyone but I needed to grind the passenger side fan mounting tabs a bit so I could shift it about 3 mm towards the drivers side. The tabs meaning the 2 prong type tabs that are at the bottom of the fan housing. The top and bottom coolant hoses needed to be trimmed about 1/2 a cm. Clearance to the pulleys look dead on like stock.
Powered by: ReviewPost PHP vB3 Enhanced Copyright 2006 All Enthusiast, Inc.
