5x100 to 5x114.3 spacers??
#1
Registered User
Thread Starter
iTrader: (17)
Join Date: May 2007
Location: FatLaCe
Posts: 3,395
Car Info: *WiDe AnD LoW*
5x100 to 5x114.3 spacers??
So I hate that the STi guys can get any rims they want and we WRX owners are stuck with a limited selection so ive decided to buy the 5x100 to 5x114.3 spacers. Before I go ahead and do that, I just wanted to know if anyone had any experience with them. Are they safe? Durable? I would love just to do a hub conversion to 5X114.3 but I just dont have the funds right now. Any info/advice would be appreciated. Thanks in advance.
Dunnojack, if you read this..PICK UP YOUR PHONE! put me in the schedule for next friday, 02/29 for that install, alignment, and fender roll again. Thanks bro.
Dunnojack, if you read this..PICK UP YOUR PHONE! put me in the schedule for next friday, 02/29 for that install, alignment, and fender roll again. Thanks bro.
#6
Registered User
Thread Starter
iTrader: (17)
Join Date: May 2007
Location: FatLaCe
Posts: 3,395
Car Info: *WiDe AnD LoW*
I think matt got the actually hubs and knuckles swapped. Im gettin reluctant on running the spacers. I searched google about the spacers and there are alot of people against them.
#7
i read up on these spacers too, the ones i looked at were 10mm. The thing is they are bad for the wheel bearings, but if your trying to run low offset rims, or any rims, they all pretty much eff with the bearings.
#10
Registered User
iTrader: (44)
Join Date: Aug 2006
Location: Palo Alto, Ca
Posts: 6,133
Car Info: 13 Taco Double Cab 4x4/ 71 Datsun 510
Steezy, you're better off swapping your hubs etc I wouldn't run anything more than 5mm spacers. In order to go from 5 x 100 to 5 x 114.3 is going to be in the range of 20mm for a good set of spacers to do that..
20mm on a suby = bearings shot to ****...
20mm on a suby = bearings shot to ****...
#14
Registered User
iTrader: (5)
Join Date: Apr 2007
Location: Sebastopol, CA
Posts: 1,662
Car Info: '04 PSM Sti
Last edited by crfsti; 04-24-2011 at 03:17 PM.