08 STi Wagon - stock wheel fitment
#1
08 STi Wagon - stock wheel fitment
been looking around for a while, wondering what size spacers people are running to get a flush fitment of the stock wheels
gonna be dropping my car on coil overs, looking to get down to half the tire tucked. fenders will be rolled. stock tire size, stock wheels.
was thinking maybe 15mm or 20mm spacers to start off with to get a general idea. havent seen a decent picture of the stock wheels sitting flush while being low. just pictures of flush wheels and monster truck height.
gonna be dropping my car on coil overs, looking to get down to half the tire tucked. fenders will be rolled. stock tire size, stock wheels.
was thinking maybe 15mm or 20mm spacers to start off with to get a general idea. havent seen a decent picture of the stock wheels sitting flush while being low. just pictures of flush wheels and monster truck height.
#3
so from further investigation into the internet, those that have been using spacers with the stock BBS wheels on the 08+ STi are running 20mm hubcentric studded spacers. fronts look to be fitted really tight. the rear looks like it can use 5mm more to match the front.
20mm f/r fits with only front fenders needing a roll. 25mm with f/r roll and front slightly pulled.
and of course thats accounting for the tires being tucked under the fender. if youre riding high with a slight fender gap, a roll wouldnt hurt.
20mm f/r fits with only front fenders needing a roll. 25mm with f/r roll and front slightly pulled.
and of course thats accounting for the tires being tucked under the fender. if youre riding high with a slight fender gap, a roll wouldnt hurt.
Thread
Thread Starter
Forum
Replies
Last Post
daaamn
Interior, Exterior & Lighting
0
09-25-2013 08:49 AM
subie OCD
Bay Area
6
01-22-2011 05:36 PM