You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Man, I'm about to go crazy.
Just came in to clear my head, because I can't figure out what I'm doing wrong.
I decided to upgrade the front brakes on my '93 Impreza wagon with 4 pot Subaru calipers, dba WRX rotors, Axxis pads, and Goodrich SS lines.
Everything went on just fine with the exception of the SS lines...they leak.
Actually, the RF line leaks at the hard line threaded connection.
Disassembly & inspection revealed no obvious defects with either the hard line or the new SS line.
I swapped the new SS lines from side to side, but the leak was still at the RF connection.
Must the be the hard line, I thought, and to confirm this I removed the new SS line & re-installed the old rubber line.
No leak.
I guess I'll have to schlep on over to the dealer for a new hard line.
Thanks for listening
Paul
Anyway, here's what the brake setup looks like:
Last edited by FW Motorsports; 05-04-2004 at 07:34 PM.
is it one all of the ss lines or just the one, actually just take them back, there has to be something wrong with them, or you crss threaded something.
Linear Mode
