Workable smog test strategy?

Thread Tools
 
Search this Thread
 
Old 03-31-2010, 10:42 AM
  #1  
Registered User
Thread Starter
 
scottj's Avatar
 
Join Date: Jun 2009
Location: Berkeley, CA
Posts: 225
Car Info: LGT Wagon
Workable smog test strategy?

I'm going to mod my Legacy GT but don't want to have to swap parts off and on every two years to pass smog. What I plan on is an AVO 380 turbo, catless UP, shorty catless DP, and TGV deletes. This will leave the OEM exhaust from the exhaust tips to the front cat and intake/filter in place.

What I plan to do is leave the OEM turbo heat shield in place making it difficult to see that the turbo is aftermarket. With the car on the ground it will be hard to see the UP and shorty DP. I will gut the TGV solenoids and install the covers and connect the wiring harness.

Will this likely pass visual inspection or am I dreaming?

What about if I get the Perrin stealth (black) TMIC?

If I have to install the catted DP every two years to pass the sniffer, it's not a big deal, but if I have pull everything off every two years it's going to be a pain. Of course then I could justify getting a FMIC since I'll have to swap the rest anyway.

What is your strategy?
scottj is offline  
Old 03-31-2010, 10:56 AM
  #2  
Registered User
 
jeSZie's Avatar
 
Join Date: May 2009
Location: San Jose, CA
Posts: 667
Car Info: GD
wont pass sniffer. might as well do that and when the time comes just slap on stock dp and youre good to go!
jeSZie is offline  
Old 03-31-2010, 11:15 AM
  #3  
iClub Silver Vendor
iTrader: (12)
 
EQ Tuning's Avatar
 
Join Date: Mar 2003
Location: 631 Railroad Ave. Fairfield, CA
Posts: 8,228
Car Info: A Laptop
That's not true... it could pass the sniffer with just the rear cat as long as the car was fully warmed up. The main issue would be the visual inspection and how picky the tech is. I think the shorty DP would be the toughest thing to hide.

-- Ed
EQ Tuning is offline  
Old 03-31-2010, 12:06 PM
  #4  
Registered User
 
jeSZie's Avatar
 
Join Date: May 2009
Location: San Jose, CA
Posts: 667
Car Info: GD
oops i thought he was getting a whole catless dp.. my bad haha
jeSZie is offline  
Old 03-31-2010, 12:32 PM
  #5  
Registered User
iTrader: (7)
 
atc5's Avatar
 
Join Date: Aug 2004
Location: san mateo
Posts: 735
Car Info: BMW X5M. No more twinscroll LGT
search for my posts....I have a heavily modded lgt dad wagon and passed smog recently w/ more mods than you have.
atc5 is offline  
Old 03-31-2010, 12:36 PM
  #6  
Registered User
iTrader: (6)
 
04caliwrx's Avatar
 
Join Date: Mar 2006
Location: on the way to lake tahoe to shread! turbo beast
Posts: 9,581
Car Info: 2016 WRX, 2014 lifter forester XT, 2005 JDM207 WGN
I also just passed with a 30r and a fmic...
04caliwrx is offline  
Old 03-31-2010, 02:19 PM
  #7  
Registered User
iTrader: (21)
 
DerekB707's Avatar
 
Join Date: Aug 2009
Location: 509
Posts: 1,457
Car Info: 07 rs STi swapped Rotated BW S200SX-56
Originally Posted by 04caliwrx
I also just passed with a 30r and a fmic...

It all comes down to how picky the smog tech is, from what I understand, a heavily modified car will pass the sniffer test with the stock down pipe, its the visual that usually gets us to fail.

Did you end up getting a catted down pipe with your new exhaust or did you just go with the cat back?
DerekB707 is offline  
Old 03-31-2010, 02:29 PM
  #8  
Registered User
iTrader: (13)
 
woocabin's Avatar
 
Join Date: Mar 2008
Location: Pleasanton /La Jolla
Posts: 3,184
Car Info: 2005 Stg.2 Wrx
an 05wrx will pass with a catless uppipe if i go stock downpipe right?
woocabin is offline  
Old 03-31-2010, 02:29 PM
  #9  
Registered User
Thread Starter
 
scottj's Avatar
 
Join Date: Jun 2009
Location: Berkeley, CA
Posts: 225
Car Info: LGT Wagon
I'm shocked! You guys passed the visual with the FMICs and everything installed? It just seems to me all those shiny tubes running all over the engine compartment to and from the front bumper scream AFTERMARKET. You didn't disguise the pipes by painting them black or putting Subaru stickers all over them? Maybe I can get away with a FMIC too.

Last edited by scottj; 03-31-2010 at 02:32 PM.
scottj is offline  
Old 03-31-2010, 02:45 PM
  #10  
Registered User
iTrader: (7)
 
atc5's Avatar
 
Join Date: Aug 2004
Location: san mateo
Posts: 735
Car Info: BMW X5M. No more twinscroll LGT
Originally Posted by woocabin
an 05wrx will pass with a catless uppipe if i go stock downpipe right?
yep, you should be just fine if you have at least one well working cat
atc5 is offline  
Old 03-31-2010, 02:46 PM
  #11  
Registered User
iTrader: (7)
 
atc5's Avatar
 
Join Date: Aug 2004
Location: san mateo
Posts: 735
Car Info: BMW X5M. No more twinscroll LGT
Originally Posted by scottj
I'm shocked! You guys passed the visual with the FMICs and everything installed? It just seems to me all those shiny tubes running all over the engine compartment to and from the front bumper scream AFTERMARKET. You didn't disguise the pipes by painting them black or putting Subaru stickers all over them? Maybe I can get away with a FMIC too.
The thinga bout the LGT is that the engine cover hides a LOT. You can easily pass w/ the LGT fitment AVO380 turbo and as long as your perrin stealth TMIC doesn't have PERRIN spraypainted on it, you should pass just fine w/ the plastic engine cover on. That hid a LOT for me.
atc5 is offline  
Old 03-31-2010, 03:12 PM
  #12  
Registered User
iTrader: (11)
 
buzzword's Avatar
 
Join Date: Oct 2009
Location: Logic
Posts: 1,294
Car Info: Reason
FMIC, TMIC - doesn't matter according to BAR and CARB. The language can be summarized by saying that if the car came with an intercooler, any other intercooler may be used. That said, the intakes and vent-to-atmosphere blowoff valves typically associated with a FMIC are more likely culprits in failing the visual check.
buzzword is offline  
Old 03-31-2010, 04:19 PM
  #13  
Registered User
Thread Starter
 
scottj's Avatar
 
Join Date: Jun 2009
Location: Berkeley, CA
Posts: 225
Car Info: LGT Wagon
I forgot about the engine cover, maybe since it didn't come with one. I better find one.

I thought you couldn't touch anything after the air filter and before the last cat unless it has a CARB sticker?
scottj is offline  
Old 04-02-2010, 02:21 PM
  #14  
Registered User
Thread Starter
 
scottj's Avatar
 
Join Date: Jun 2009
Location: Berkeley, CA
Posts: 225
Car Info: LGT Wagon
Do the 2.5i's have an engine cover? If I get a FMIC, an engine cover w/o a hole for the TMIC would make the FMIC look more legit.
scottj is offline  
Old 04-02-2010, 02:41 PM
  #15  
Registered User
iTrader: (7)
 
atc5's Avatar
 
Join Date: Aug 2004
Location: san mateo
Posts: 735
Car Info: BMW X5M. No more twinscroll LGT
i have an engine cover you can borrow to pass smog.

Your best bet is to resort back to TMIC and OEM intake for smog w/ the engine cover, then simply re-install FMIC piping. Took me about 30 minutes to re-install my FMIC piping after I passed smog w/ the OEM TMIC setup
atc5 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Salty
Teh Politics Forum
7
02-01-2005 01:25 PM
Salty
Teh Politics Forum
11
10-07-2004 08:41 AM
Salty
Teh Politics Forum
10
09-15-2004 01:29 PM



Quick Reply: Workable smog test strategy?



All times are GMT -7. The time now is 05:57 PM.


Top

© 2024 MH Sub I, LLC dba Internet Brands



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.