You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Intorducing FLI two piece rotors for 2004-2009 STI
Fine Line Imports is proud to release the FLI two piece rotor upgrade kit for the 2004-2009 STI. This rotor kit has been perfected with many hours of hard work. In conjunction with WR racing we have designed and tested a heavy duty two piece rotor that can not only withstand your track day abuse but also your daily driving. This high quality 72 vane slotted Brembo race rotor is matted to a CNC machined light weight hat made from 7075-T6511 aluminum. Each rotor is a little more then 5lbs less then a stock rotor and total rotor diameter has increased by 3mm (1.5 on each side). The thickness has remained the same which allows them to be used with the factory Brembo caliper.
The only complicated part of using these rotors is that a modification needs to be made to the existing or new pads that are going to be used. On the set below we had the pads slightly cut on a waterjet in order to make enough clearance from the out side diameter of the pad in relation to the outside diameter of the rotor hat. FLI will offer any Ferodo, Hawk, OEM Brembo and Pagid pads with the kit and if you want to use a certain brake pad that we do not offer, then send them in and FLI will have them cut for fitment.
Overall I am very happy with the way these have turned out. After performing the correct heat cycling bedding process, verification was made that there was is no clearance issues. Fitment is A+ and they are drilled for both 5x100 and 5x114.3 so one rotor works for everyone with a STI or Brembo brake take offs.
Rotor Highlights
1.High quality 72 vane Brembo race rotor. (Used on open wheeled race cars)
2.7075 light weight and strong rotor hats for both 5x100 and 5x114.3
3.Weight reduction of a little over 5lb per corner.
4.Two piece design saves money when reordering rotors.
FLI is excited to offer this very high quality brake rotor/pad upgrade kit to the Subaru community for any STI car. If you have any questions please let me know.
As I said above pricing for the rotors will be 750.00 Our first production run is commencing now. If you would like to pre order a set and be one of the first to get them please let me know. If ordering pads as well let me know and I will work out a very good deal on set of pads. I choose to run the Pagid street pads with mine and am very happy with them.
These would be extra super dee duper strict with a touch of redonculusly strict. ETA on the first 50 sets will be about 30 days. So how many sets can I put you down for.
Linear Mode
