Just got my CHEAP S204 front lip installed :) 06/07
#17
Registered User
Thread Starter
iTrader: (19)
Join Date: Jan 2006
Location: South San Jose
Posts: 751
Car Info: 2007 WRX CGM
thanks
I just sanded with 600 grit and used 3 coats of some flat black enamel paint. I'm not too sure how well this paint will last but hopefully long!
I drilled 3 in the front and 2 on the sides + the 4 clips that is already on the car. The lip came with hardware but I only used the 4 clips and 4 self tapping screws that came with. Found another 2 laying around and used that. Overall, it was pretty easy and self explanatory install.
Simon seems like a pretty nice guy who knows how to do business. I'm sure if one of you called him to set something up, a group buy can be in session.
I drilled 3 in the front and 2 on the sides + the 4 clips that is already on the car. The lip came with hardware but I only used the 4 clips and 4 self tapping screws that came with. Found another 2 laying around and used that. Overall, it was pretty easy and self explanatory install.
Simon seems like a pretty nice guy who knows how to do business. I'm sure if one of you called him to set something up, a group buy can be in session.
#19
banned
iTrader: (5)
Join Date: Jan 2008
Location: NorCal, SF East Bay
Posts: 1,456
Car Info: 2007 WRX Limited | vf43'D
I bought that same lip from the same guys, happy with it.
I used the plastic push plugs that are already in the bottom of the bumper connection to the undertray to do the initial lineup. Then I drilled pilot holes in the bumper bottom edge where the mounting holes on the s204 lip is. Then ran the screws that came with the lip up through those holes.
I scrape a lil bit almost every day coming out of my parking lot @ work, but the lip is on there good @ solid still without tape. If for some reason the screws got ripped out, I could still re-fit the lip using the right size plastic push plugs.
I used the plastic push plugs that are already in the bottom of the bumper connection to the undertray to do the initial lineup. Then I drilled pilot holes in the bumper bottom edge where the mounting holes on the s204 lip is. Then ran the screws that came with the lip up through those holes.
I scrape a lil bit almost every day coming out of my parking lot @ work, but the lip is on there good @ solid still without tape. If for some reason the screws got ripped out, I could still re-fit the lip using the right size plastic push plugs.
#30
Registered User
iTrader: (19)
Join Date: Dec 2005
Location: Union City
Posts: 1,256
Car Info: nothing right now
I'll ask to see if we can do a combination of lips or if it strictly has to be 06/07.
_please add on to this list_
1. Damey1 04/05?
2. juicy
3. JRsWRX maybe
4. TSNWrX07
5. PikkaGTR,
6. aznboi320,
7. vietpunk916 maybe
8. SubyN00by friend
9. y0gfx 04/05?