2002 sti swap bugeye
11-12-2009, 12:23 PM
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: california
Posts: 659
Car Info: 2002 sedan sti swap high on meth
2002 sti swap bugeye
Car is a 2002 wrx which i got in march of 2008 from a bank that repoed it from the owner. When they got it the owner was doing something to it and the radiator was missing, the timing belt hanging off, no front bumper on the car and just all around beat up. I talked to the original owner and he told me how he just replaced the the short block and it had all these top dollar parts on the car. I bought the car picked it up trailered to the shop and started looking at it. realized now that it had a knock off header, knock off intercooler, knock off just about everything. i put the tbelt back together tried to start it and no go. so did a compression test and all cylinders were low. Pulled the motor and began to dissasseble and found many issuse so i decided to scrap the motor and start over.
So i started with a EJ257 block and heads(sti) and purchased 100mm cp pistons, forged rods, acl bearings, crower cams and crower springs and retainers. The first shop i ordered the parts from went out of business and stole my money so it took a while for me to get my money back. (just got the last bit a month ago or so) and had to re order. I got the cylinders bored and honed and then began to build the motor. Motor is now built and installed along with a lot of other things including brembos, sti 6 speed and r180 diff. All work has been done by me with the help of Thad. We've built the whole car from top to bottom. The only thing i didnt do was tune and bore the motor
Mod list ( that i can remember)
ENGINE
2005 ej257
cp 100mm pistons
eagle rods
ACL bearings
Crower 272 cams w/ ti springs and retainers
Sti pink injectors with Perrin fuel rail
Tial 38mm ewg
Halman MBC
Equal length header
Jic stainless exhaust with Ti muffler
SMC meth injection
Perrin FMIC with HKS intake and silicon inlet
Stock sti vf39
307 whp and 340 wtq (stock sti on his dyno makes 215/215)
comming soon
FP red
850cc
perrin blow through
DRIVELINE
2005 sti 6 speed
R180 Diff
Sti Hubs
Front and rear brembos
Stainless lines
Loud *** brake pads
Act HD clutch (slipping like crazy)
Today i will have my CUSCO twin disc
TIC clunk killer race busing kit
Group N motor mounts
Agency power pitch stop
Kartboy short shifter
SUSPENSION and WHEELS
Tein SS-P coilovers
ST front and rear Sway
Perrin rear endlinks
Advan RCII white 17x8.5 +45
Azines rt-615 245/45/17
Interior and exterior
JDM 3 piece front lip
JDM power folding mirror
JDM gauge cluster
Bride GIAS driver and passanger seats
2005 STI console swap
Defi amber LINK boost oil pressure and egt gauges
Nrg hub and quick release with personal neo grinta wheel
Sti door cards and rear seat
Kenwood ddx 8019 DD indash
Blitz shift ****
Spec C roof vent
Kaminari Carbon scoopless hood.
JDM HID headlights retrofitted with TSX projectors
One of every trunk and wing
Wingless
S202 carbon wing and trunk
Sti wing and trunk
(soon to come)
2005 sti rear conversions. Bumper fender flares and tail lights.
Now pics
the day i got it
progress
So i started with a EJ257 block and heads(sti) and purchased 100mm cp pistons, forged rods, acl bearings, crower cams and crower springs and retainers. The first shop i ordered the parts from went out of business and stole my money so it took a while for me to get my money back. (just got the last bit a month ago or so) and had to re order. I got the cylinders bored and honed and then began to build the motor. Motor is now built and installed along with a lot of other things including brembos, sti 6 speed and r180 diff. All work has been done by me with the help of Thad. We've built the whole car from top to bottom. The only thing i didnt do was tune and bore the motor
Mod list ( that i can remember)
ENGINE
2005 ej257
cp 100mm pistons
eagle rods
ACL bearings
Crower 272 cams w/ ti springs and retainers
Sti pink injectors with Perrin fuel rail
Tial 38mm ewg
Halman MBC
Equal length header
Jic stainless exhaust with Ti muffler
SMC meth injection
Perrin FMIC with HKS intake and silicon inlet
Stock sti vf39
307 whp and 340 wtq (stock sti on his dyno makes 215/215)
comming soon
FP red
850cc
perrin blow through
DRIVELINE
2005 sti 6 speed
R180 Diff
Sti Hubs
Front and rear brembos
Stainless lines
Loud *** brake pads
Act HD clutch (slipping like crazy)
Today i will have my CUSCO twin disc
TIC clunk killer race busing kit
Group N motor mounts
Agency power pitch stop
Kartboy short shifter
SUSPENSION and WHEELS
Tein SS-P coilovers
ST front and rear Sway
Perrin rear endlinks
Advan RCII white 17x8.5 +45
Azines rt-615 245/45/17
Interior and exterior
JDM 3 piece front lip
JDM power folding mirror
JDM gauge cluster
Bride GIAS driver and passanger seats
2005 STI console swap
Defi amber LINK boost oil pressure and egt gauges
Nrg hub and quick release with personal neo grinta wheel
Sti door cards and rear seat
Kenwood ddx 8019 DD indash
Blitz shift ****
Spec C roof vent
Kaminari Carbon scoopless hood.
JDM HID headlights retrofitted with TSX projectors
One of every trunk and wing
Wingless
S202 carbon wing and trunk
Sti wing and trunk
(soon to come)
2005 sti rear conversions. Bumper fender flares and tail lights.
Now pics
the day i got it
progress
12-13-2009, 03:25 PM
#14
Registered User
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: california
Posts: 659
Car Info: 2002 sedan sti swap high on meth
new parts ths week. thanks to kw for these. after having a mishap with the wrong rings and lots of detonation in 20 miles i was sent a replacement set of pistons and rings and hopefully will have the block sleeved in about 3 weeks. my front caster camber p;ates came saturday but i was gone and missed them. hopefully i can put the fronts together this week and get my spare 2.0 going soon so i can drive
