Project Bugeye stroker
03-10-2017, 01:49 PM
#31
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2014
Location: san jose
Posts: 128
Car Info: 2002 wrx
re torque head to 90 ft lbs.
check valve lash with the head torque down. right side looks good and the left side i need to mic 006 so i can order the right size bucket. or 006 is fine to run?
waited two weeks to get 2 new valve lifter bucket. recheck lash on intake .008-.007 in and exhaust .010-.011 in
check valve lash with the head torque down. right side looks good and the left side i need to mic 006 so i can order the right size bucket. or 006 is fine to run?
waited two weeks to get 2 new valve lifter bucket. recheck lash on intake .008-.007 in and exhaust .010-.011 in
Last edited by lugnuts; 04-13-2017 at 11:59 PM.
05-16-2017, 12:03 AM
#39
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2014
Location: san jose
Posts: 128
Car Info: 2002 wrx
h&r coilvers installed , the ride is really stiff, its making me feel sea sick on the freeway .
installed front and rear camber bolts and set toe .
Painted 4 pot wrx and brembo rotors installed
installed front and rear camber bolts and set toe .
Painted 4 pot wrx and brembo rotors installed
Last edited by lugnuts; 05-16-2017 at 12:28 AM.
06-09-2017, 11:02 PM
#40
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2014
Location: san jose
Posts: 128
Car Info: 2002 wrx
got a Feal 411 coilovers , the h&r is really stiff and its killing my organs specially when im driving on the free way . the Feal 411 is better , damping adjustment and the ride height adjustment is easy to set . Stick with struts and spring !!!
Last edited by lugnuts; 06-28-2017 at 10:51 PM.
06-28-2017, 10:15 PM
#44
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2014
Location: san jose
Posts: 128
Car Info: 2002 wrx
Jdm engine is out.
tgv delete
port match tgvs
timing belt component installed
thanks to Travis@snailperformace for the base map hopefully i get everything ready and running this weekend .
tgv delete
port match tgvs
timing belt component installed
thanks to Travis@snailperformace for the base map hopefully i get everything ready and running this weekend .
07-06-2017, 10:19 PM
#45
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2014
Location: san jose
Posts: 128
Car Info: 2002 wrx
act 6 puck installed and drop the engine in. i have to grind the engine housing to fit the fp green htz. water pipe and compressor housing is hitting the top of the engine where the transmission get bolted .
too much modification just to fit the turbo.
too much modification just to fit the turbo.
