Heedz Formerly (WRXnCrew) Sedona Red GDA
#196
Couple days ago at Jamo's
'13 Brembos w/unknown brand blanks and Project Mu HC+ Pads much thanks Zach!
Pedal feel is significantly improved over the Wilwoods due to the larger piston body, will come back with a Pad review eventually after I drive these for a bit. Feels weird to be back on brembos though.
'13 Brembos w/unknown brand blanks and Project Mu HC+ Pads much thanks Zach!
Pedal feel is significantly improved over the Wilwoods due to the larger piston body, will come back with a Pad review eventually after I drive these for a bit. Feels weird to be back on brembos though.
#197
So probably not any time soon? No worries, just thought I would throw it out there.
#198
08+ STi Intercooler today, pretty good improvement size wise. This was installed with a Mishimoto 90 elbow and throttle body coupler.
USDM STi TMIC.
Rows: 34
core diemnsions: 18.5 x 6.625 x 3 (confirmed)
Total cubic core space: 368ci
VS
USDM 08 STI TMIC
Rows: 38
core dimensions: 20.75 x 6.85 x 3 (confirmed)
Total cubic core space: 426ci (for a 15.7% increase over USDM 04-07 STi core)
USDM STi TMIC.
Rows: 34
core diemnsions: 18.5 x 6.625 x 3 (confirmed)
Total cubic core space: 368ci
VS
USDM 08 STI TMIC
Rows: 38
core dimensions: 20.75 x 6.85 x 3 (confirmed)
Total cubic core space: 426ci (for a 15.7% increase over USDM 04-07 STi core)
#201
Had a brake line pop on me last night, luckily was able to stop.
What I guess was from hard braking the old style goodridge lines moved from the mounting point on the strut was not tight and caused a move towards the wheel and rubbed a hole through it. Replaced with new StopTech lines that are coated.
Stock endlinks from 2003 look like this and were replaced with 2012 ones that were removed with minimal miles since purchase of the car.
What I guess was from hard braking the old style goodridge lines moved from the mounting point on the strut was not tight and caused a move towards the wheel and rubbed a hole through it. Replaced with new StopTech lines that are coated.
Stock endlinks from 2003 look like this and were replaced with 2012 ones that were removed with minimal miles since purchase of the car.
#203
swapped tires to me final speeds. Put the rear 2 pots on. And picked up a greddy tic Attachment 90469 Attachment 90466 Attachment 90467 Attachment 90468
#207
Somethings I have done lately.
TXS Front Mount
Also Traded for a Seibon hood today Anyone who is interested in the large STi style scoop check my forsale Ad. Also had a scoop delete made by tap plastics A little clay and TLC on the hood made it pop really well.
TXS Front Mount
Also Traded for a Seibon hood today Anyone who is interested in the large STi style scoop check my forsale Ad. Also had a scoop delete made by tap plastics A little clay and TLC on the hood made it pop really well.