C2H5OH

iTrader: (5)

Paperweight (see below) condition 310mm KVR/ION AP Racing 4-pot Brake kit

Please bear with me. I cannot make it any shorter without skipping some info.

I have this super unique Small Brake Kit that I had on my 03 WRX. It was sold by KVR/ION Performance around 2004 with a $1700 retail. My guess it was made for 15-inch wheels, but it worked nice for my Tahoe runs using stock wheels. It has some amazing stopping powers! Specs and info below. Images include a sales ad from the original owner (2006).

Price for a used kit in good condition should be around $750 I think.
Price in its current condition is a big question mark. I figure 2-piece kit with AP Racing 4-pots should be worth something if you're willing to replace rotors and pads. Your cost for replacing pads/rotors will be around $450. Make me a reasonable offer!

Specs:
- This kit fits with 02/03 WRX 16"x 6.5" stock wheels.
- Total weight savings over the stock wrx front brake set-up is approximately 13lbs each side. Yes, 13 pounds lighter per side over the stock 2-pots!
- 12.2" x 1" (310mm x 25.4mm) 2 piece rotors.
- Ferodo FRP219H 2500 series pads.
- AP Racing 4-pot calipers - 5100 series.
- Mounting Brackets - aluminum and super light weight

Pics:
https://i.imgur.com/QWjzEmv.jpg
https://i.imgur.com/8SUWJ4o.jpg
https://i.imgur.com/YyHiASX.jpg
https://i.imgur.com/0Kfi4QP.png
https://i.imgur.com/uJcawNM.png

The bad:
- Rotors will need to be replaced. $270 - I was quoted $135 each from Coleman.
- Ferodo FRP219H Pads need to be replaced. $120, other pads available for CP5100.
FERODO Street Brake Pads - FRP219H - TopBrakes
- Rotors are 2-piece, so you'll need to replace them on the hats.
- Kit sat in storage last few years after 65K+ miles on it, so you'll probably have to service the calipers.
- KVR stopped support of this product, so rotors are a custom order now.

Rotors can to be custom ordered from Coleman:
Coleman

My Email exchange with Larry at Coleman the week of 9/1/14:
- Those are not our part #s, but if you go on our website: Coleman you can fill out one of our rotor spec sheets & we can build for you.
- I gave him specs: pair of 12.2x1 inch rotors, 10 mounting holes, used with AP Racing 5100 series 4-pots.
- Their response: Price for that size rotor will cost 134.35 each.

Also, consider shipping them the original rotor to make sure they get it right the first time.

AP Racing CP5100 Caliper specs:
AP Racing - Road Car Upgrades - Road - Aftermarket Brake Calipers - 4 Piston Calipers - CP5100 Family - 130mm Mounting Centres - Suits Ø295x25.4mm Discs

C2H5OH

iTrader: (5)

And brakes are gone! Thanks for the interests all!