02-07 3" Vishnu Signature Series Catback Exhaust
09-13-2014, 04:05 AM
#1
02-07 3" Vishnu Signature Series Catback Exhaust
This is a full 3" catback that will be up for sale as of next week. The downpipe to catback mate will be a 3" V-Band on this exhaust. If you have the typical 3" Flange fitting $30-40 at your local exhaust shop will get this exhaust fitting right onto your exhaust with 0 problems and will be worth every penny. There is also a flex pipe in the mid pipe.
Why am I selling it? Well because I will be v-banding a Greddy TI-C.
This exhaust is mellow but opens up really well at higher RPMS check video to see how it sounds. That is with a cat in the downpipe and GT Spec UEL headers.
Anyone who's heard this exhaust definitely comments on it.
There is some black high temp paint on part of the exhaust but it does not effect any part of it.
When bought as a full turboback this used to cost almost $1800+.
Asking $400OBO for the catback. This is a quality piece that you will not regret buying. This will be available mid next week. I will take trades for parts and + cash depending on what you have. If you know my car you probably know what kind of parts I would trade for this. Here's a short list.
-Front STi Brembos
-DBA Slotted Rotors for Brembos
-Hankook RS3 235/45 or 245/40 R17 or near equivalent type tire
-FA500 Coilovers or Feal 441
-Full 05 center console swap
-Rear STi seats and/or front/rear door cards
-Audio Integrations 12" Box
FS: Vishnu Signature Series Exhaust - NASIOC
Last edited by Heedz; 10-01-2014 at 08:49 AM.
09-14-2014, 06:07 PM
#4
Registered User
iTrader: (8)
Join Date: Jun 2012
Location: Santa Cruz/Watsonville CA
Posts: 676
Car Info: 07 STi, 1995 Outback
Currently have this turbo back and had it on my previous STI; love how it can be low key at low rpms, but sound like a monster once you let her loose.
Bump for my favorite internet warrior lol
glws
Bump for my favorite internet warrior lol
glws
09-15-2014, 08:32 PM
#11
Ok so the exhaust is off now. This is what you get. Greddy Midpipe, vishnu axleback, 3" flange. There was a size difference between the Greddy and vishnu. This allows you to get a 3" piece welded on between the axleback and midpipe for better fitment. Also is now resonated so it will be quieter. I will also include a new 3" gasket. Asking $400 OBO now due to the pipe manufacturer difference. 
Last edited by Heedz; 09-16-2014 at 07:27 AM.
09-16-2014, 08:29 AM
#14
Registered User
iTrader: (7)
Join Date: Mar 2011
Location: The Bay Area
Posts: 2,572
Car Info: 2006 STI
you beat me to it, I was going to say the same thing. It honestly looks identical to what a friend had a shop make for a couple of hun and his was all 3". Looks like Same magnaflow canister too or is that a special vishnu tuned series by Magnaflow?