Difficult to put in Reverse on cold start
#16
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: Hollister
Posts: 158
Car Info: 09 WRX Stage 2
Yes I have aftermarket shift bushings, what you guys are experiencing sounds worse than mine. Sometimes I just sit there longer and play around shifting the gears until it lets me catch reverse.
#20
Registered User
iTrader: (9)
hmm. odd. i know my 5spd will crunch into 1st if thrown in too fast (same speed engage for diff gears no prob) and reverse will have a hard time going in. but after i let the car roll just a tad bit, seems like the tranny just sucks in R. but if all ur brakes are off and ur car is able to roll freely, hope ur not looking at something major! GL
#21
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: Hollister
Posts: 158
Car Info: 09 WRX Stage 2
It's only on a cold start that it is like this, after I drive down the block and try to throw it in reverse it really hasn't been a big deal just wondering if anyone else was having the same problem.
#22
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: Hollister
Posts: 158
Car Info: 09 WRX Stage 2
Sorry I don't mean to revive the thread but I fixed the problem. I adjusted the clutch pedal and got rid of a lot of the play and that got it feeling like driving a brand new car lol!!
#25
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: Hollister
Posts: 158
Car Info: 09 WRX Stage 2
Behind and above the gas pedal It was a pain in the ***. Needed a 12mm open wrench and some plyers.
*Edit* First I had to loosen the 12mm and then take the bolt out of that Y bracket and gave it a couple turns until it was on its last thread. Put it all back together tightened nut and now I have no trouble throwing it into gear on cold starts.
*Edit* First I had to loosen the 12mm and then take the bolt out of that Y bracket and gave it a couple turns until it was on its last thread. Put it all back together tightened nut and now I have no trouble throwing it into gear on cold starts.
Last edited by Aaron831; 10-21-2013 at 12:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
stubz203
Engine/Power - non turbo (All non turbo Imprezas)
3
03-19-2007 07:31 PM
allxusedxup
Engine/Power - EJ20T (pre-2006 WRX and JDM)
14
07-01-2004 11:43 PM