chook69

hi! these borla headers sound nice.. can i get them for a ej2200 91 Lx liberty seden (auto)? tho im from australia! can i get them here an will that pass the rta standeds "dont wont no sticker on me car"

Ragnarok

I think your wrong.
Show me where?

FlushedGF8

For some reason i can not find a single port header anywhere for my 97 impreza L. can anyone help with this problem?

addicted2jayz

iTrader: (2)

i dont know if this is the right place to ask this question but im trying to sell my 00 impreza axle back and someone with a 02-03 impreza wants to buy it and we both dont know if it will fit the 02-03 model. will it be a direct fit or any modification will be needed to do in order for it to fit?

Marcus Aurelius

Looking to increase power & get nice sound out of my 2011 Impreza Outback Sport - 5 door. Looks just like a WRX minus the turbo. Finding it difficult to find and exhaust system for a non-turbo. Anyone out there have the same car that they have changed the exhaust on? Do I have to go aftermarket? Would really love an SPT, but dealer seems to be clueless on whether or not WRX or STI will fit on a non-turbo. ??

iDriveMyi

iTrader: (5)

The WRX exhaust will bolt right up the the non-turbo imprezas as long as it is a CatBack and not a TurboBack exhaust. The WRX SPT exhaust should be fine. There are also many many other aftermarket exhaust that in my opinion sound nicer for cheaper. I currently have an Invidia N1 street CB that I bought off a member on here for $300 and it was on his WRX. It bolted up fine to my 2.5i. Good luck with your search.

tmangt650

I have a Tsudo N1 3" Catback on my 08 hatch. Bought it new for $330 online It is very loud, yet not the annoying hon-DUH fart can sound. Does drone a bit in the cabin, (very unfriendly for the woman, and it gets pointed out alot). The only set back I have on the exhaust is it rubs against the heat shield and the body (mid driveshaft) so now, I ordered the exhaust header wrap to help with the heat and taking a bit of the vibration out. It also gets very close at the tip to the bumper.

Went to the exhaust shop to try and get another hanger welded on and/or get it fixed, was unable to do anything..

Installed it myself. Was told it should have fit perfectly, maybe I did something wrong..

meifert

will a 2011 WRX cat back fit an Impreza? i cant seem to get a solid andswer on this.

looking at this one and wondering

Ultimate-Racing :: Subaru :: WRX (08+) :: Exhaust :: 3" Dual Muffler Catback Exhaust ('08-11 WRX Sedan / '11 STi Sedan)

mrchyes

current setup consists of stock 04 RS Exhaust that was cut before the axle back right after the hanger so it would hit that exhaust shield nice muahaha, its so loud. for stock that is.

Plans are to get a full Tsudo headerback exhaust, probably getting the headers within a month or two and leaving the stock catback (whats left of it) on until i can get the tsudo catback. catless straight piped ftw.

02RS25

iTrader: (9)

I have an 03 Impreza RS sedan. Im running borla rep uel header, stock cats, custom made 3" midpipe and axle back. Havent switched out the donut yet so it has its leaks, but well worth the $200 for the entire system plus the 80 bucks to have a shop weld, cut, flange, and install. Im running an unknown custom made muffler. looks like stock wrx muffler but a tad bigger. not a fan of baby eaters.

Subi2.5i

I have a 2007 impreza 2.5i and want to put an exhaust on it. What size would be good without losing power? But a nice time to it as well. Also might put a turbo on it

kenjsylvia

I have an 09 2.5i and just installed the Nameless axle-back muffler delete, and it is awesome. It's pretty loud for an otherwise stock 2.5i, so I'm careful around the police, but it's not unbearable. I think I paid around $300 with gaskets and polyurethane bushings. An awesome upgrade and I can definitely feel a difference. Shifting feels smoother, and it takes off a lot easier. I got the 4" slash cut tips which I HIGHLY recommend. It definitely gives it a nice look.

Only piece of advice is to angle the bushings in the very back a little before tightening all the bolts down. It pulls the axle-back up just a little bit, otherwise, it hangs down a little too low in my opinion.

Subi2.5i

Where did you get it from? Is it bolt on?

Justin Beam

i have a 2008 impreza 2.5i that im putting together an exhaust for. having mid pipe custom done from cat back and possible high flow cat or cat delete. can't decide on a muffler. any suggestion?

JourdanWithaU

iTrader: (39)

It's super easy to just get a WRX catback. I haven't messed with the cats yet. If I can tune the car, I'll want to get some catless pieces from Rallisport Racing.

Right now, I have an Invidia Q300 catback and I quite like it.