Exhaust question
08-12-2013, 02:15 AM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Location: Napa, CA
Posts: 222
Car Info: 06 Subaru Impreza WRX STi
Exhaust question
I have an 06 wrx sti, wondering what people use to make a stock down pipe and an hks carbon ti work? Kind of a newb question but I'd appreciate your guys input. New owner and the previous one wasn't the sharpest tool in the shed when it came down to certain mods.
08-15-2013, 10:06 AM
#2
Registered User
iTrader: (6)
Join Date: Jul 2011
Location: Sacramento, CA
Posts: 383
Car Info: 2003 WRX
Bolts
.. get new hardware from your local hardware store, it needs to be thin enough so go through your stock dp hardware holes, use large washers on the catback side.
.. remove the donut gasket on the stock dp.. it will slide off. Save it.
.. use a 2-bolt, 3 inch exhaust gasket when mating the dp ad cb. Part of the stock dp will sit inside the cb.
.. get new hardware from your local hardware store, it needs to be thin enough so go through your stock dp hardware holes, use large washers on the catback side.
.. remove the donut gasket on the stock dp.. it will slide off. Save it.
.. use a 2-bolt, 3 inch exhaust gasket when mating the dp ad cb. Part of the stock dp will sit inside the cb.
Last edited by Superusdm; 08-15-2013 at 10:12 AM.
08-15-2013, 10:16 AM
#3
Stock downpipe to 3 inch catback adapter + gasket
RallysportDirect
RallysportDirect
Thread
Thread Starter
Forum
Replies
Last Post
brucelee
Bay Area
12
08-01-2009 10:59 AM
Skatemur
Engine/Power - EJ20T (pre-2006 WRX and JDM)
12
10-01-2004 12:56 PM
dj_kiyoshi
Engine/Power - EJ20T (pre-2006 WRX and JDM)
15
07-24-2004 12:36 AM
2K3WRX808
Engine/Power - EJ20T (pre-2006 WRX and JDM)
10
06-28-2004 01:40 PM
legacy2003
Interior, Exterior & Lighting
6
06-08-2003 04:43 AM