You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
hey yall im new to this site......and this is my first post....i just hooked up my stock boost controller after not using it for over a year.....i sold my electronic boost controller to buy a utec in a week...but for now...my stock solonoid dosent boost past 10 psi. i tried resetting the comp. what could it be?
Ive ran across this too, and has to do with hooking stock hoses back up proper and using the original restrictor. If you get the two hoses backwards, you only get wastegate pressure which is about 8 psi. Give or take.
Do a search. Someone put up some good directions on how to hook it back up to stock. Good luck.
Check the restrictor in the hose from the wastegate to the intake...if it's missing you never boost higher to 10 psi...i resolve the problem when i purchase a new hose with the correct restrictor on...
i think i am having the same problem is you. i put a mbc on a stock 05 wrx and then took it off and put it back to stock and now i cant boost past 10 psi. do you sugest that i look into that restrictor inside that hose? where is that hose located?
Linear Mode
