FS/FT: (CA) 2005 Legacy GT |NF Built Motor| (NorCal)
#1
Registered User
Thread Starter
Join Date: Sep 2014
Location: Sacramento, CA
Posts: 14
Car Info: 2005 Legacy GT
FS/FT: (CA) 2005 Legacy GT |NF Built Motor| (NorCal)
Year, Make, Model: 2005 Legacy GT Unlimited
Milage: ~108,600 on body Built Motor: ~15,000 (will go up as it is my DD)
Transmission: Manual 5speed
Price: $14,000 - or Trades (see below)
Location: Sacramento, California
Color: Satin White Pearl (SWP)
Title: Clean
Lien: None
VIN: 4S3BL686656221246
Trades: 2008 FXT plus cash on my end.
Details: First off, this car is running perfectly with a < 1-year-old built motor. I purchased this car in Omaha, NE August of 2013 w/86,000 miles and drove it until that December when the banjo filters wound up plugged and motor gave out. The previous owner had the car for a very short period of time and didn’t maintain the motor as it needed to be. When this happened, I had the motor rebuilt in Minneapolis, MN by NF Performance. Here they tore the whole motor down and rebuilt it from the ground up – this was around 103k on the body. Since, the motor (and car) has been running absolutely solid. I moved to California this past September and drove it over the course of two days without even the slightest hiccup. Overall amazing car, that I’d hate to see go, but need to get into something a little bigger (FXT) - Doesn't NEED to sell.. just would like something new. The car is currently registered in Minnesota - has MN plates and is good until July 2015.
Oil has been changed every 3000-3500 miles w/Rotella T6 – religiously. Since in my ownership I have taken immaculate care of the car maintaining everything to the utmost extent.
Disclaimer: there are some dents here and there on the car – as expected for a now 10-year-old car. There is one on the driver’s side door that is much more noticeable – looks like someone door dinged it bad prior to my ownership (see photos). The first owner had repairs done to the front end shortly after purchasing it – I don’t have all the details on what happened, but it was never totaled (clean title). There is a small leak in the steering rack – nothing considerable, but I generally have a quart of power steering fluid with me incase I need to add a little bit here and there.
Onto the good stuff:
Motor: Build was done by NF Performance at ~93k on the body
- EJ257 Block
- Manley H Tuff Rods
- ACL Main and Connecting Rod Bearings
- ARP 2000 Headstuds
- JE Pistons
- GS DP Adaptor
- STi Uppipe
- Gates Timing Kit with Water Pump (competed at the same time as the motor build.
- OEM Oil Cooler
- OEM Gaskets
- OEM Crank
- KillerB Oil Pickup
- GS TGV Deletes
- Turbosmart Dualport BOV
- DW65v Fuelpump (not installed)
Clutch:
- Clutch Masters FX350
Exhaust:
- Invidia Catless Downpipe
- 3” OBX-R (amazon) Catback (installed July 2014)
Turbo:
- Kinugawa TD05H-18G
- Kinugawa Oil Lines
Wheels/Tires:
- 17x8 Bronze/Gold Rota Grids
- Pirelli P Zero Nero All Season Tires P225/45R17
Brakes:
- Stoptech Slotted Rotors Front and Rear (installed November 2014)
- Pads – Can’t recall brand (installed November 2014)
Misc:
- Driver’s side axle replaced August 2014
- Torque Solutions Short shifter
- Cobb shift ****
- Sylvania zXe headlights
- 35% Tint all windows
I do have an OEM downpipe and Yakima Q-towers that can go with the sale as well.
Photos:
Motor Build:
additional photos on anything particular can be done, no problem.
Feel free to post or PM me with further questions. I will be updating this thread whenever need be.
Thanks for looking,
Dan
Milage: ~108,600 on body Built Motor: ~15,000 (will go up as it is my DD)
Transmission: Manual 5speed
Price: $14,000 - or Trades (see below)
Location: Sacramento, California
Color: Satin White Pearl (SWP)
Title: Clean
Lien: None
VIN: 4S3BL686656221246
Trades: 2008 FXT plus cash on my end.
Details: First off, this car is running perfectly with a < 1-year-old built motor. I purchased this car in Omaha, NE August of 2013 w/86,000 miles and drove it until that December when the banjo filters wound up plugged and motor gave out. The previous owner had the car for a very short period of time and didn’t maintain the motor as it needed to be. When this happened, I had the motor rebuilt in Minneapolis, MN by NF Performance. Here they tore the whole motor down and rebuilt it from the ground up – this was around 103k on the body. Since, the motor (and car) has been running absolutely solid. I moved to California this past September and drove it over the course of two days without even the slightest hiccup. Overall amazing car, that I’d hate to see go, but need to get into something a little bigger (FXT) - Doesn't NEED to sell.. just would like something new. The car is currently registered in Minnesota - has MN plates and is good until July 2015.
Oil has been changed every 3000-3500 miles w/Rotella T6 – religiously. Since in my ownership I have taken immaculate care of the car maintaining everything to the utmost extent.
Disclaimer: there are some dents here and there on the car – as expected for a now 10-year-old car. There is one on the driver’s side door that is much more noticeable – looks like someone door dinged it bad prior to my ownership (see photos). The first owner had repairs done to the front end shortly after purchasing it – I don’t have all the details on what happened, but it was never totaled (clean title). There is a small leak in the steering rack – nothing considerable, but I generally have a quart of power steering fluid with me incase I need to add a little bit here and there.
Onto the good stuff:
Motor: Build was done by NF Performance at ~93k on the body
- EJ257 Block
- Manley H Tuff Rods
- ACL Main and Connecting Rod Bearings
- ARP 2000 Headstuds
- JE Pistons
- GS DP Adaptor
- STi Uppipe
- Gates Timing Kit with Water Pump (competed at the same time as the motor build.
- OEM Oil Cooler
- OEM Gaskets
- OEM Crank
- KillerB Oil Pickup
- GS TGV Deletes
- Turbosmart Dualport BOV
- DW65v Fuelpump (not installed)
Clutch:
- Clutch Masters FX350
Exhaust:
- Invidia Catless Downpipe
- 3” OBX-R (amazon) Catback (installed July 2014)
Turbo:
- Kinugawa TD05H-18G
- Kinugawa Oil Lines
Wheels/Tires:
- 17x8 Bronze/Gold Rota Grids
- Pirelli P Zero Nero All Season Tires P225/45R17
Brakes:
- Stoptech Slotted Rotors Front and Rear (installed November 2014)
- Pads – Can’t recall brand (installed November 2014)
Misc:
- Driver’s side axle replaced August 2014
- Torque Solutions Short shifter
- Cobb shift ****
- Sylvania zXe headlights
- 35% Tint all windows
I do have an OEM downpipe and Yakima Q-towers that can go with the sale as well.
Photos:
Motor Build:
additional photos on anything particular can be done, no problem.
Feel free to post or PM me with further questions. I will be updating this thread whenever need be.
Thanks for looking,
Dan
Last edited by dhanso312; 02-24-2015 at 05:33 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Gigs
Cars For Sale
1
10-01-2012 11:42 AM
greenpoop
NorCal Classifieds
23
07-09-2009 08:31 PM
FLIWRX
Engine and Drivetrain
0
04-30-2007 01:27 PM
bugeyehybrid
Cars For Sale
3
11-14-2006 09:48 AM