FS: Defi BF Series Gauges/Pod
Thread Starter
Registered User
Joined: Dec 2003
Posts: 80
From: Green Bay Wi
Car Info: 03 Sonic Yellow WRX
FS: Defi BF Series Gauges/Pod
**SOLD**
Hey all, I'm selling my Defi BF Series Gauges and Pod from my WRX. I have had these in my WRX for about a half a year. They are all in perfect condition and everything works beautifully. They are all the 60mm black faced gauges. I have the Boost, EGT, Oil Pressure gauge's, the Control Unit II, and an A-Pillar Gauge Pod. I had this in a 03 WRX, but I know it fits 02-04, not sure about 05. Assuming they are the same.
The pod fitment isnt the greatest, b/c its aftermark. It replaces the whole A-pillar. there are two screw holes in it. What I did was drilled a small hole into the metal where the top screw hole is. then screwed it in w/ a bigger screw. The bottom fit snug, so I just used the top one and it never moved. Also, the gauge pod is for standard 60mm gauges, the Defi's are slightly bigger, so i had to dremel them a lil bit bigger. It could use some more even, depending on how you want your gauges to sit.
I've packaged these back up in the original boxes. I am missing one english instruction booklet, but there are 3 other ones so you'll be fine. Also i used all the double sided stickytape that came w/ them that were supposed to be used w/ the gauge pods that came w/ the gauges. But since I'm including a full A-pillar pod you won't need those, but they are still included, just minus doublesided tape.
I am looking to get 750 SHIPPPED/OBO.
I'm located in Green Bay, WI.
You can reach me by PM here, or aim: Suby Doo 03


I had the Control Unit behind my flip-out screen... it lights up white, but i have no pictures of it, and i rarely used it b/c i kept it hidden w/ the screen up.


everything.

EGT gauge and wires.

Turbo gauge, wires/vaccum line.

Oil pressure gauge and wires.

This piece here is for the Oil Pressure. Take off your intercooler, and on the top of the block there is a gold plug. Use an allen wrench to get it out. Then this plug that fits the Defi Oil Pressure gauge, screws into the block in its place. I bought this from a Subaru Dealer, dont remember the part number, but it works! Your also gonna wanna crow's foot wrech when installing otherwise its a pain in the but!

Heres the control unit, with all the wires to connect to power, and to connect all the gauges.

And all the gauges/CU in there rightfull boxes.

THANKS FOR LOOKING!!!!
Hey all, I'm selling my Defi BF Series Gauges and Pod from my WRX. I have had these in my WRX for about a half a year. They are all in perfect condition and everything works beautifully. They are all the 60mm black faced gauges. I have the Boost, EGT, Oil Pressure gauge's, the Control Unit II, and an A-Pillar Gauge Pod. I had this in a 03 WRX, but I know it fits 02-04, not sure about 05. Assuming they are the same.
The pod fitment isnt the greatest, b/c its aftermark. It replaces the whole A-pillar. there are two screw holes in it. What I did was drilled a small hole into the metal where the top screw hole is. then screwed it in w/ a bigger screw. The bottom fit snug, so I just used the top one and it never moved. Also, the gauge pod is for standard 60mm gauges, the Defi's are slightly bigger, so i had to dremel them a lil bit bigger. It could use some more even, depending on how you want your gauges to sit.
I've packaged these back up in the original boxes. I am missing one english instruction booklet, but there are 3 other ones so you'll be fine. Also i used all the double sided stickytape that came w/ them that were supposed to be used w/ the gauge pods that came w/ the gauges. But since I'm including a full A-pillar pod you won't need those, but they are still included, just minus doublesided tape.
I am looking to get 750 SHIPPPED/OBO.
I'm located in Green Bay, WI.
You can reach me by PM here, or aim: Suby Doo 03
I had the Control Unit behind my flip-out screen... it lights up white, but i have no pictures of it, and i rarely used it b/c i kept it hidden w/ the screen up.
everything.
EGT gauge and wires.
Turbo gauge, wires/vaccum line.
Oil pressure gauge and wires.
This piece here is for the Oil Pressure. Take off your intercooler, and on the top of the block there is a gold plug. Use an allen wrench to get it out. Then this plug that fits the Defi Oil Pressure gauge, screws into the block in its place. I bought this from a Subaru Dealer, dont remember the part number, but it works! Your also gonna wanna crow's foot wrech when installing otherwise its a pain in the but!
Heres the control unit, with all the wires to connect to power, and to connect all the gauges.
And all the gauges/CU in there rightfull boxes.
THANKS FOR LOOKING!!!!
Last edited by Sonic Boost; Feb 18, 2005 at 02:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NorCalSubie07
NorCal Classifieds
19
Feb 14, 2012 02:39 PM
GGBGuy
Used Aftermarket Car Parts For Sale
0
Dec 5, 2006 07:12 AM
mikkellucci
Used Aftermarket Car Parts For Sale
3
May 11, 2006 12:57 PM
marcinzk
NorCal Classifieds
19
Oct 23, 2005 10:48 AM



