Hello everyone. As you know we have completely redone my entire car. With the last 2.5 motor and t04r turbo we made 536 hp to the wheels. I am selling the fuel system off the car since we have changed the entire car. The system is good for stock hp levels to 750 hp to the wheels. The system will include the following parts with under 5k miles on them.


* Fuel Pump In tank Assembly with two Walbro 255 high pressure fuel pumps. Each of them are wired up and ready to go. All you will need to do is drop this assembly in and provide a 12 volt power supply.

* -8 Fuel Hose to Aeromotive Inline Fuel Filter

* Aeromotive Inline 1000 HP Fuel Filter

* -8 Braided Fuel Feed line from Aeromotive Filter to Front 1000 HP Fuel Filter

* Russell 1000 HP Inline Fuel Filter

* -8 Braided line to fuel tee

* Fuel tee with dual -6 fuel lines, one to each rail

* Perrin Black Anodized Fuel Rails with larger fuel ports and fittings for high hp applications

* -4 Braided Fuel Rail Return Lines to Fuel Pressure Regulator

* Aeromotive Boost Dependent Fuel Pressure Regulator with Fuel Pressure Gauge. -4 Fuel Rail Lines feed into regulator on each side

* -6 Fuel Pressure Regulator to factory fuel Return braided hose.

This will bolt on to your car. All you will need is to wire the fuel pumps to a 12 volt source. Since the Perrin Fuel Rails are direct drop in, any injectors in your car now will work perfectly. This fuel system new is extremely expensive and is top of the line. No WRX or STI will ever max this system out..... Unless you change over to Alcohol

Here are the prices for this system new:
2 Walbro 255 Fuel Pumps $180.00
Aeromotive Fuel Filter $130.00
Russell Fuel Filter $46.00
Perrin Fuel Rails $400.00
Aeromotive Fuel Pressure Regulator $130.00
Fuel Pressure Gauge $40.00
-8 Braided Fuel Lines $100.00
-6 Braided Fuel Lines $50.00
-4 Braided Fuel Lines $40.00
-8 Fittings $60.00
-6 Fittings $40.00
-4 Fittings $20.00

This kit is cost around $1236.00 for those parts. I don’t have any price in mind for this kit however I would like to sell it to someone who is going to make the system proud with tons of hp. I will consider all offers and trades.

Here are the pictures that I have. Basically you can search for all the parts online to see more pictures.

 

interested in FPR, lines and tee's, are there any closer pictures of the fuel setup? Looks very similar to what Im tring to build. VERY NICE.

 

bump for nick