I don't know if its been asked before (but my search didn't find it..), but does any company out there offer the ability to have your wiring harness converted and shipped back to ya for a plug n play installation? I will most liely be dropping a jdm wrx 2.0L into a US 2.5 RS. I am sure i can manage the wiring myself, but i thought it might save me down time on the car if anyone could convert the wiring harness, add the right plugs and wire lengths and such, so i could recieve it back and simply install the harness along with the motor. Get my install time down to one day rather than several at least.

I would contact LIC Motorsports for this. I am not sure if they could do it, but if anyone could that would be ADAM@LIC.

www.fi-systems.com

Hay Neko if you find out, PM me I'm in the same boat, the down time with a plug and play harness would be great!

sheit the fabed up harness wouldn't cut that much time the hardest part is taking the hash and heater core the wiring is around 15 to 20 wires to solder at the ecu other than that it is just routing the wrx wires from the ecu to the engine bay

I would contact LIC Motorsports for this. I am not sure if they could do it, but if anyone could that would be ADAM@LIC.


Ill second asking LIC. Adam is a great guy and is always willing to help if he can.

It does cut that much time as some of the connectors are different...I just got done doing a sti 2.0 swap....

what connectors?? the motor plugs go with the ecu... other than that all you have to do is untape the harness in you car label the wires ,cut out what you dont need and solder what you need,its is around 20 wires or so,the longest part was taking apart the damn car and routing the harness through the car