I am sure this has been brought up before but I could not find much info on this. The more I have been thinking the easyer it seems to make the alarm arm when the car is still running. My old car was able to do it and I think it is simply a matter of a few wire snips. Anyone have any more info on this?

please list make of vehicle, type of alarm system and which turbo timer are you planning to use.

there are a few current postings on nasioc.com regarding integrating alarm systems with turbo timers.

netZ

Originally posted by 128d
I am sure this has been brought up before but I could not find much info on this. The more I have been thinking the easyer it seems to make the alarm arm when the car is still running. My old car was able to do it and I think it is simply a matter of a few wire snips. Anyone have any more info on this?

I have a 02 wrx with the stock alarm and I have the Blitz FATT DCII turbo timer.

its simple. all you do is cut a few wires. i forgot exactly what colors they were, but if you check out www.scoobymods.com they'll have the info. they use a different TT but the cutting of the wires is the same.
gluck.
:D

but i heard that you can arm it while its counting down, but
the starter kill will be disabled... i think that's where everyone
left off.

anyone have a solution to keep the starter kill from getting
deactivated?

theres a pink wire that you splice into the ebrake. if the ebrake is released while the count down is happening the car will shut off.
:D

got a problem....
I was under the imprseeion the conecter I am looking to cut into has only 3 wires on it however I cant find it...
heres what i am looking at down there someome want to point out to me which one it the damn "accessories" wire?

If it helps I have a auto

there are two locations where you have to find. one is in the center console. you have the upgraded alarm system right? and the other location is on top of the fuses. you're looking for a lttle black box.
:D

Don't you have to splice into the plug that connects the Ignition wire? The blue plug I have undone in the center of the picture?

the only time i used the blue plugs was during the install. and i had the harness too. did you already install the TT?
:D

Yeah I have already installed the TT.

Okay from my understanding the accessory wire will be cut and left that way. Rite? The side from under the dash will just be tapped twice and routed to the two wires on the black boxes. Rite?

Okay I got another queston. Do I leave the accessory wire intact and simpely rerout it so it no longer goes to the TT and also so it is tapped to the two other wires on the alarm?

Okay I finaly figured it out a few hours ago. No thanks to the lacking instructions. Maybe I am just "slow" or somthing, but this has inspired me. I documented the process complete with pictures. Tommrow I will have a total and very discriptive guid on how to do this mod.