SF Bay area: hotchkis springs for 02-03 wrx
Thread Starter
Registered User
iTrader: (1)
Joined: Nov 2002
Posts: 39
From: SF East Bay
Car Info: silver WRX grocery getter
SF Bay area: hotchkis springs for 02-03 wrx
=====SOLD 
=====
For sale in San Francisco East Bay area
Hotchkis lowering springs for '02-'03 WRX...$120 plus shipping.
Hotchkis price is $225
Lowers the car 1.5" front, 0.75"rear
Spring rates (variable): 230 lb/in front, 146 lb/in rear
Used for about 5000 miles, all street miles...not tracked or autocrossed.
See hotchkis website for pics
http://www.hotchkistuning.com/cgi-b...catalogno=19406
I just got some STi struts/springs so the hotchkis have to go.
Email me rollodoh@hotmail.com or pm if interested
=====For sale in San Francisco East Bay area
Hotchkis lowering springs for '02-'03 WRX...$120 plus shipping.
Hotchkis price is $225
Lowers the car 1.5" front, 0.75"rear
Spring rates (variable): 230 lb/in front, 146 lb/in rear
Used for about 5000 miles, all street miles...not tracked or autocrossed.
See hotchkis website for pics
http://www.hotchkistuning.com/cgi-b...catalogno=19406
I just got some STi struts/springs so the hotchkis have to go.
Email me rollodoh@hotmail.com or pm if interested
Last edited by bugeyebuggy; Mar 31, 2004 at 04:21 PM.
Thread Starter
Registered User
iTrader: (1)
Joined: Nov 2002
Posts: 39
From: SF East Bay
Car Info: silver WRX grocery getter
Pics of the springs installed on my wagon can be seen here:
https://www.i-club.com/gallery/showp...sort=1&cat=500
https://www.i-club.com/gallery/showp...sort=1&cat=500
https://www.i-club.com/gallery/showp...sort=1&cat=500
https://www.i-club.com/gallery/showp...sort=1&cat=500
Registered User
iTrader: (2)
Joined: May 2003
Posts: 282
From: comin' out the 3rd St. liquor Sto'
Car Info: 2002 MBP saloon
hey filiceg, can you give a quick write up about that setup? Hows the handling, harshness on crappy SF streets, etc. Been looking into this setup (hotchkis+KYB's) so any info would be great! Thanks!
Guest
Posts: n/a
so far so good. I currently have them setup at 3 and 3 which is the 3rd stiffest setting. I have heard that you should break them in on this setting. I did drive around a bit with them on 2 and 2 and the ride is really nice, I am sure that at 1 and 1 it will ride nearly as smooth as stock.
I decided to install this kit myself and have some rattle coming from the left rear. I can't figure out what the issue is???? I am taking it in for an aligement this week once I recieve my rear camber adjustment.
Send me an email sometime if you want to go for a ride.
GINO
I decided to install this kit myself and have some rattle coming from the left rear. I can't figure out what the issue is???? I am taking it in for an aligement this week once I recieve my rear camber adjustment.
Send me an email sometime if you want to go for a ride.
GINO
Thread Starter
Registered User
iTrader: (1)
Joined: Nov 2002
Posts: 39
From: SF East Bay
Car Info: silver WRX grocery getter
nope, the springs will not fit an '04 unless you get a set of '02-'03 strut tops. Your '04 main strut assembly will work fine, but the tops are different.
Thread
Thread Starter
Forum
Replies
Last Post
brucelee
Bay Area
37
May 24, 2009 07:47 AM
SubieStyle
New Aftermarket Car Parts For Sale
4
Jan 9, 2007 01:04 PM
bugeyebuggy
Used Aftermarket Car Parts For Sale
0
Mar 29, 2004 10:56 PM
