Welcome fellow i-clubers !!!!!

I will continue to post on the only REAL i-club !

My car is running well in snow tire rally inpsired 4 x4 mode - BUT - I have some secret mods in the works getting ready for next year !

Al~

Come on man..the new i-club doesn't allow secrets...you must tell us all of your planned mods. BTW how is the snow with all that power and the new suspension setup?

~Evan

Wecome Al,

Can we start fresh and get along here?

Im game if you are :)

~v6

V6 - we're all on the same team !

I am working on some ideas to make the car have much greater spool up down low and keep the same HP

So far I have done wonders with the stock exhuast manifolds - - the process involves extensive porting and polish with a dremel tool - - ceramic coating and then wrap and cover with the sheilds

The idea is to send as much heat and noise to the turbo as you can

Anyway - the car is still running every day and works 100% - - have not hit the snow yet but I cant wait

Did you raise the car for the snow?

How 'bout a skid plate?

if V6 and AL can be friends....then count me in :D

The only thing i have planned for this winter is alot of mud and snow built up in ma wheel wells!
late,
Chris

Originally posted by Alfriedesq
Welcome fellow i-clubers !!!!!

I will continue to post on the only REAL i-club !

My car is running well in snow tire rally inpsired 4 x4 mode - BUT - I have some secret mods in the works getting ready for next year !

Al why not just get your self a DSM like you talked about before the power band is ungodly?

yay for the real iclub...nick gets on my nerves

raising your car for the winter is for girls!! :D Lowered 4" on coilovers I will always be!

Nate

way to go Alex...

Originally posted by dug-e-fresh
way to go Alex...

Wrong button.... get it right or your banned. ;p

he he he he... ever seen "Anti-trust"....

I am watching you!!

def

Originally posted by Angus
if V6 and AL can be friends....then count me in :D


Where's that "Ignore posts" button?

New home of Alfriedesq

Whoa...you need some furnature...this place is bleak!

Aloooha! :D

Originally posted by i stands4 IDIOT
Whoa...you need some furnature...this place is bleak! you don't like the "Blackness"!!??

Originally posted by IS2Scooby
Aloooha! :D
what are you doing in here Richard!? :p

The same thing I am. Learning about Horsepower... and spreadin' the ALOOOOHA!

just wanted to say hi

Al, I have in my office a spare stock header, and in my room here at home a Dremel with more bits than any man should rightfully own.

Care to share any pointers on manifold porting besides simply opening up to match gaskets with a nice taper?

Anything special in your 'extensive porting' job?

anyone extrude and hone the stock headers with jet hot? I'm thinking of doing this as well

The material is really hard, so I don't see how Al did it with a Dremel. I had a friend port mine, and he told me that he went through a few heavy duty professional grade grinding bits. He did a great job and even opened and smoothed out the bends. At some point during the winter, I'll take them off and have them coated with JetHot 2000.

Darn it, Al. I was gonna register here using your nick and confuse people by posing as the anti-Alfriedesq. This would entail being nice to vendors, underestimating my horsepower quotes, etc. etc.

j/k :p


-Pace <-- Now forming odds on whether this place will be a little less noisy and significantly more friendly to the general populace than the forums now known as NABISCO.

your crazy if you do it with a dremel, it'll take forever

You just use the sanding drums - it takes about 4 5 packs to do the job

All I do is grind it till its all mirror smooth and the ends match up good at the joints

News flash: Nobody cares!

:lol:

mr. al.

why is it that you ignore the suby_dude?

what have i done? ... :(

AllfriedEggs,
your here :) so hows yer new wheels n tires ??

Weasel :)
Andy...

one more for:

who gives a ****

Originally posted by suby_dude
mr. al.

why is it that you ignore the suby_dude?

what have i done? ... :(

You were probably out of stock on those light up LED wiper squirters when allfriedeggs really needed them to go faster! :p

Originally posted by Weasel 555
AllfriedEggs,
your here :) so hows yer new wheels n tires ??

Weasel :)
Andy... Those prodrive gc-o7c was really sweet - so far they are holding up perfect

Suby dude - I have your books still here - they are the wrong ones - should I just mail them back to you ?

Hey Al do you have any recent pics of your ride? I would love to see what those rims look like.

Torch

If this is the new home of Alfriedesq.....can we lock the doors and burn it down?

i third "who gives a dam."

Originally posted by HongKongBeef
i third "who gives a dam."


ya....god forbid we have an actual serious tuner on this board. i was starting to miss all the posts reguarding which turbo timer and boost gauge were best :rolleyes:

Originally posted by IgotWRXed
ya....god forbid we have an actual serious tuner on this board. i was starting to miss all the posts reguarding which turbo timer and boost gauge were best :rolleyes: I have recently discovered that the Kinso turbo timer is the best along with the mega loud blow off valve - those are the parts I needs