FS: (Chicago) P&L rotated kit GT30R or GT35R
Thread Starter
Registered User
Joined: Dec 2008
Posts: 2
From: Ontario, Canada
Car Info: 05 USDM STi
FS: (Chicago) P&L rotated kit GT30R or GT35R
Here is the deal: I ordered a P&L rotated turbo kit with cat and re-route (costs $230 extra) but due to the auto industry taking a crap and my job is related I got laid off and I need money for better things.
The kit is still with P&L pending full payment you can pick GT35R or the GT30R turbo make me an offer but no low balling link below so you can price it out and make me an offer.
KIT HAS NOT EVEN SHIPPED TO ME , STILL @ P&L!!
Prices:
GT30R US$3499 + ship
GT35R US$3549 + ship
Thats $230 FREE for the cat and re-route of WG
Shipping in USA is usually $50
http://www.pandlmotorsports.com/osCo...ath=21_378_382
This is the most comprehensive rotated turbokits anywhere. They went about making it so it was a real DIY so you get zip ties brackets braided power steering line etc. Dont pass this up I wish I didnt have to to be honest I am really torn up about having to sell it
Check out their 80+ page COLOR install manual with step by step instructions to help install this!! No one gives you an install manual that too pictures and step by step, I know every car is different but this has got to make your life easier instaalling
http://www.pandlmotorsports.com/misc...tall_v01.3.pdf
Some pics of the generic kit and then some of their re-route. I work as a (or worked) industrial mechanic and I can tell you their fabrication is not welding its friggin art!! Their work is beautiful
Garrett GT3071r Turbocharger (.63 A/R)
or
Garrett GT3076r Turbocharger (.63 A/R or .82 A/R)
or
Garrett GT3582r Turbocharger (.82 A/R or 1.06 A/R)
(Larger turbos available, must contact us for further information and project review/management)
Stainless Steel Oil Feed and Drain Lines
Stainless Steel Water Feed and Drain Lines
Turbo Nuts and Bolts for Downpipe/Up Pipe Connection
Heat Reflective Blankets for Feed and Drain Lines
Polished Stainless Steel Up Pipe
Up Pipe Gaskets
Up Pipe to Turbo Studs and Nuts
Welded Stainless Steel "Triangle Bracket" on Wastegate Flange for Added Support
Stainless Steel Bracket for Added Mounting Support
Swaintech Coating Available
Polished Stainless Steel Downpipe
Downpipe to Cat Back 3" Flat Gasket
Two o2 Sensor Bungs (stock o2 sensor & wideband o2 sensor)
Two o2 Sensor Bung Closure Bolts Included
Stainless Steel Flex Pipe Section
High Flow Cat Available
Swaintech Coating Available
Tial 44MM EWG
Colors Other Than Silver Available Upon Request
EWG Re-route to Downpipe Available
V-Band Connections
Polished Dump Tube (Or Re-route Pipe if Applicable)
Polished Aluminum Cold Air Intake
Beaded Pipe Ends Ensure a Leak Free Connection
Giant K&N Air Filter for Maximum Flow
Integrated 3" Big MAF housing For Proper Tuning Capability
Cold Air Intake can be Substituted for a weld in 3" Blow Through MAF Housing
Cold Air Intake can be Substituted for a full 4" Short Ram Intake for Speed Density Systems
Turbo to Y Pipe Elbow
Beaded Pipe Ends Ensure a Leak Free Connection
Easily Connect Your Stock Location TMIC Set Up to Our Rotated Kit
Elbow can be Substituted for Turbo to Front Mount Intercooler Pipe (Please contact us for custom FMIC piping solutions)
Oil Catch Can
High Temp Hose and Connector Fittings
Air/Oil Separator Upgrade Available (TMIC & FMIC Versions Available)
Stainless Steel Braided Power Steering Line
AN Connection Fittings for Leak Free Connection
Stainless Steel Braided AVCS Line
AN Connection Fittings for Leak Free Connection
Misc.
Assorted Zip Ties for a Clean Install
All Misc. Gaskets - Subaru OEM Where Available
All Misc. Silicone Couplers
Detailed 84 page Instruction Manual
Full Color Pictures & Easy to Follow Directions
Tuning Calibration Data Included for our Intake MAF Housing
The kit is still with P&L pending full payment you can pick GT35R or the GT30R turbo make me an offer but no low balling link below so you can price it out and make me an offer.
KIT HAS NOT EVEN SHIPPED TO ME , STILL @ P&L!!
Prices:
GT30R US$3499 + ship
GT35R US$3549 + ship
Thats $230 FREE for the cat and re-route of WG
Shipping in USA is usually $50
http://www.pandlmotorsports.com/osCo...ath=21_378_382
This is the most comprehensive rotated turbokits anywhere. They went about making it so it was a real DIY so you get zip ties brackets braided power steering line etc. Dont pass this up I wish I didnt have to to be honest I am really torn up about having to sell it
Check out their 80+ page COLOR install manual with step by step instructions to help install this!! No one gives you an install manual that too pictures and step by step, I know every car is different but this has got to make your life easier instaalling
http://www.pandlmotorsports.com/misc...tall_v01.3.pdf
Some pics of the generic kit and then some of their re-route. I work as a (or worked) industrial mechanic and I can tell you their fabrication is not welding its friggin art!! Their work is beautiful
Garrett GT3071r Turbocharger (.63 A/R)
or
Garrett GT3076r Turbocharger (.63 A/R or .82 A/R)
or
Garrett GT3582r Turbocharger (.82 A/R or 1.06 A/R)
(Larger turbos available, must contact us for further information and project review/management)
Stainless Steel Oil Feed and Drain Lines
Stainless Steel Water Feed and Drain Lines
Turbo Nuts and Bolts for Downpipe/Up Pipe Connection
Heat Reflective Blankets for Feed and Drain Lines
Polished Stainless Steel Up Pipe
Up Pipe Gaskets
Up Pipe to Turbo Studs and Nuts
Welded Stainless Steel "Triangle Bracket" on Wastegate Flange for Added Support
Stainless Steel Bracket for Added Mounting Support
Swaintech Coating Available
Polished Stainless Steel Downpipe
Downpipe to Cat Back 3" Flat Gasket
Two o2 Sensor Bungs (stock o2 sensor & wideband o2 sensor)
Two o2 Sensor Bung Closure Bolts Included
Stainless Steel Flex Pipe Section
High Flow Cat Available
Swaintech Coating Available
Tial 44MM EWG
Colors Other Than Silver Available Upon Request
EWG Re-route to Downpipe Available
V-Band Connections
Polished Dump Tube (Or Re-route Pipe if Applicable)
Polished Aluminum Cold Air Intake
Beaded Pipe Ends Ensure a Leak Free Connection
Giant K&N Air Filter for Maximum Flow
Integrated 3" Big MAF housing For Proper Tuning Capability
Cold Air Intake can be Substituted for a weld in 3" Blow Through MAF Housing
Cold Air Intake can be Substituted for a full 4" Short Ram Intake for Speed Density Systems
Turbo to Y Pipe Elbow
Beaded Pipe Ends Ensure a Leak Free Connection
Easily Connect Your Stock Location TMIC Set Up to Our Rotated Kit
Elbow can be Substituted for Turbo to Front Mount Intercooler Pipe (Please contact us for custom FMIC piping solutions)
Oil Catch Can
High Temp Hose and Connector Fittings
Air/Oil Separator Upgrade Available (TMIC & FMIC Versions Available)
Stainless Steel Braided Power Steering Line
AN Connection Fittings for Leak Free Connection
Stainless Steel Braided AVCS Line
AN Connection Fittings for Leak Free Connection
Misc.
Assorted Zip Ties for a Clean Install
All Misc. Gaskets - Subaru OEM Where Available
All Misc. Silicone Couplers
Detailed 84 page Instruction Manual
Full Color Pictures & Easy to Follow Directions
Tuning Calibration Data Included for our Intake MAF Housing
Thread
Thread Starter
Forum
Replies
Last Post
STi_AnT
Used Aftermarket Car Parts For Sale
9
May 17, 2013 12:14 PM
LunarHonour
NorCal Classifieds
10
Mar 26, 2009 07:04 PM
west005
Used Aftermarket Car Parts For Sale
0
Apr 19, 2006 06:21 AM
