'05 STi bits FS - suspension and more.
Thread Starter
Warm Fuzzy Admin
iTrader: (45)
Joined: Mar 2001
Posts: 13,799
From: Sacramento, CA
Car Info: 97 LOB, 05 FXT, 03 Tundra
'05 STi bits FS - suspension and more.
Selling this stuff for a buddy. I'm in SACRAMENTO and can arrange meetup within reason. Prices do not include shipping. To make this absolutely clear - no dibs, no holding, cash gets the parts. I don't have time to deal with dibs on all this stuff.
$80/pair: Strut bars front and rear -- Knock off STi.
$200 Ferodo DS3000 brake pads (never used)
$175 Driver’s side Schroth sport 4 point harness
$125 Injen cold air intake (into the fender well) - Red krinkle, in original box. Manufacturing defect (crack in tube) professionally welded (welds are ont he bottom of the pipe and not visible when installed). No CARB sticker, can be obtained from Injen.
$350 accessport V1, '05 STi, loaded with GST maps (race [c16] and street maps)... can provide information / dyno sheets for it. (catted DP, stock exhaust, SPT intake).
$400obo Toyo RA1's plenty of track days left on them. 255/40/17.
$200 Tire pressure sensors w/display (7 total sensors and the in car unit)
$obo Rear subframe lock down bolts.
$obo -- 06 Roof Wing -- endcaps painted CGM.
$80/pair: Strut bars front and rear -- Knock off STi.
$200 Ferodo DS3000 brake pads (never used)
$175 Driver’s side Schroth sport 4 point harness
$125 Injen cold air intake (into the fender well) - Red krinkle, in original box. Manufacturing defect (crack in tube) professionally welded (welds are ont he bottom of the pipe and not visible when installed). No CARB sticker, can be obtained from Injen.
$350 accessport V1, '05 STi, loaded with GST maps (race [c16] and street maps)... can provide information / dyno sheets for it. (catted DP, stock exhaust, SPT intake).
$400obo Toyo RA1's plenty of track days left on them. 255/40/17.
$200 Tire pressure sensors w/display (7 total sensors and the in car unit)
$obo Rear subframe lock down bolts.
$obo -- 06 Roof Wing -- endcaps painted CGM.
Last edited by sybir; Dec 3, 2008 at 12:16 PM.
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Thread Starter
Warm Fuzzy Admin
iTrader: (45)
Joined: Mar 2001
Posts: 13,799
From: Sacramento, CA
Car Info: 97 LOB, 05 FXT, 03 Tundra
Thread Starter
Warm Fuzzy Admin
iTrader: (45)
Joined: Mar 2001
Posts: 13,799
From: Sacramento, CA
Car Info: 97 LOB, 05 FXT, 03 Tundra
I posted a picture 30 minutes ago of the intake. I'll ask my buddy for a picture of the welds.
Here:
The CAI had a manufacturing quality control issue...the defect has been fixed (tubing was cracked and painted from the factory, it was repaired and never driven on.) The welds are on the underside of the pipe.
crack#1
crack#2
Picture of the repair.
Here:
The CAI had a manufacturing quality control issue...the defect has been fixed (tubing was cracked and painted from the factory, it was repaired and never driven on.) The welds are on the underside of the pipe.
crack#1
crack#2
Picture of the repair.
Last edited by sybir; Dec 2, 2008 at 09:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
macker
NorCal Classifieds
0
Jul 30, 2012 02:00 PM
Speed Element
Engine and Drivetrain
9
May 13, 2010 11:10 AM
Speed Element
Suspension / Brakes / Handling / Wheels / Tires
4
Jun 1, 2006 02:52 PM
WorldONE
Vendor Group Buys/Specials
0
Nov 18, 2003 12:42 AM