Hey ive seen a few STi's with black painted headlights on the inside and it looks damn sexy......

Does anyone have this done to their sub and/or how I should go about doing it at an affordable price?!?!?!

here is just one page i know of off hand
http://forums.nasioc.com/forums/showthread.php?t=957478&highlight=DIY
hope it helps, there are some pics.

sweet thanks bro........................gotta get it done now

hey here is the link i used. i just did it 2 weeks ago and it came out really good.

http://forums.nasioc.com/forums/showthread.php?t=957478

Sweet, this is next weekends project

hey here is the link i used. i just did it 2 weeks ago and it came out really good.

http://forums.nasioc.com/forums/showthread.php?t=957478

Do you have any pictures of how yours turned out?!?!

you have to take a heat gun and melt the seal and pull the lense off, remove the chrome piece and scuff and paint it with high temp paint, engine block paint preferably. did it to mine only to clear the orange pieces but painted a friends all with the same process in about 2 hrs.

^my bad, didnt see the rest of this thread.

hey here is the link i used. i just did it 2 weeks ago and it came out really good.

http://forums.nasioc.com/forums/showthread.php?t=957478

im scurred to do it

it is easy, the hard part is getting them out of the car.
oven 225 deg, 20 min, pull it apart, not hard.
but the the triwhen you put them back together is get the wiring harnes readyt o go back in, the low bean bulb connector, get that in first pull it through, then assemble it, if you do not it is a ***** to get in and acrross the back when assembled.

stupidchicken03 i had an 02 those were easy to get in and out, and paint.
the 06 is the one with the wiring harness dilema.
63330
63332
63331

lol regardless of how easy it is, im still a lil nervous to f*** it up

and HID would be an expensive mistake

oh hid, i do not know what they look like inside, i thnik they they are the same, just the bulbs and the ballast are things that are different.

i never saw one, hid light assembly, but it still is a just parts that can gotogether only one way. i would just do not take the projectoer lens assembly aprt. it kinda breaks down in to three pieces. the lens the back and the guts, other then that there was nothing else to take apart, kinda do not need to. imean three parts that you do not have to touch excluding the reflector that you want to paint. the only suggestion that i have is mask off the silver area underneath the orange reflector, dont paint it black.