I'm gettin a little head start. :punchy:

So what's up 'CenCalSinnerz'?

Atleat its only a 3day work week for me. Thank goodness for Turkey Day

Nice.

I love my job. This will be my first thanksgiving with my family in years! F my last job, I always had to work holidays.

Nice.

I love my job. This will be my first thanksgiving with my family in years! F my last job, I always had to work holidays.

get me a job foo i need to be able to pay my car payment lol

Time in a half is always good though.

But Ryan has a soft side, and likes to get a blanket on the holidays and get all snuggled up next to the fire!! AWW...
MeRRy Christmas to all, and to all a gNiTe

LOL

hey ryan aka vrooompsh or whateva!

if ur gunna be all badass and send me pm's dont try it!

i wasnt talking to u and u moved urself into it... i was talking to CenCALSTI aka Brandon

hey ryan aka vrooompsh or whateva!

if ur gunna be all badass and send me pm's dont try it!

i wasnt talking to u and u moved urself into it... i was talking to CenCALSTI aka Brandon

omg wtf is going on?

"i feel like im taking crazy pills"

I think a fight is going to be going down?

I got a ringside seat!!

Time in a half is always good though.

But Ryan has a soft side, and likes to get a blanket on the holidays and get all snuggled up next to the fire!! AWW...
MeRRy Christmas to all, and to all a gNiTe

LOL

lol. is there something with you and ryan we should know about rob?

but really you should get that pinky checked out man! lol messin with ya!

here are the PM's he set to me on i-club!

fool:
chill that **** out OR YES THERE WILL BE A ****ING PROBLEM.. take the ****ing log outta your god damn ass and chill the **** out.. cuz yes i was talking to you and your your ass was talking to me so stop acting like a ****ing hard ass chill out her where all friends her. your getting cought up in your own words cuz your not keeping your story straight.. and no one said you scared janae outta your car

watch it:
yea really are the **** talker huh ***** i ADVISE you shut it.. because he was making fun of you in that post not me cuz you got the tree stuck up your ass and got all but hurt

and meet me:
in jamestown midnight


hahahahaha!

j00 talKin bOUt mE roB? lol

get me a job foo i need to be able to pay my car payment lol

Where the hell are you working now? Sorry, I can't get anyone a job if they don't have edu/exp in their resume.

LoL this is gettin crazy!!

j00 talKin bOUt mE roB? lol

no... i gave him a part

You didn't know what illiteracy means (that's ironic) but you know what interpretation is? lol

You read online (illiteracy), unless someone read it to you and you interpreted it wrong. hahaha


Go to mah munday thredd!

you can always count on good ol woodie to make you feel stupid! lol FIZUCKER!

j00 talKin bOUt mE roB? lol

i thought he was, but there is TO MANY GOD DAMN RYANS!!! can you all make up other names or something! lol

respond to my pms then if your not scared

Maybe this will cheer up the Mood.

Hey woodward aka ryan, why dont you tell them about your long lost cousin??
http://i169.photobucket.com/albums/u236/Baby-G_011/QW.jpg

Where the hell are you working now? Sorry, I can't get anyone a job if they don't have edu/exp in their resume.

got laid off.. looking for a job.. might get one at the cheese factory with ERRKKK :(

no... i gave him a part

I said Rob. "Your illiteracy is killing us Charlie" lol


you can always count on good ol woodie to make you feel stupid! lol FIZUCKER!

Mr. Woodward iz takin all y'all back to skool! =P

its all a bunch of dramma that belongs in high school and well all of us are outta there but one

Maybe this will cheer up the Mood.

Hey woodward aka ryan, why dont you tell them about your long lost cousin??
http://i169.photobucket.com/albums/u236/Baby-G_011/QW.jpg

dude i see the relation!

its all a bunch of dramma that belongs in high school and well all of us are outta there but one

ummm... 2

ur forgetting brayan!

Maybe this will cheer up the Mood.

Hey woodward aka ryan, why dont you tell them about your long lost cousin??
http://i169.photobucket.com/albums/u236/Baby-G_011/QW.jpg

Psh. I'm not related to you!


got laid off.. looking for a job.. might get one at the cheese factory with ERRKKK :(

O sweet. That's where I started. I know there's hella job openings bc of their new factory in Texas. Hit up www.hilmarcheese.com and apply online right now.

now ryans callin me!! hahahahaha

I said Rob. "Your illiteracy is killing us Charlie" lol


again "i feel like im taking crazy pills"

Found one of woodward when he had short hair :)
http://i169.photobucket.com/albums/u236/Baby-G_011/surside13_edited.jpg

O sweet. That's where I started. I know there's hella job openings bc of their new factory in Texas. Hit up www.hilmarcheese.com and apply online right now.

already have a interview on tuesday

I think a bunch of us can relate to this guy...

http://imagecache2.allposters.com/images/pic/HPM/SM1106~Stoned-Towelie-Posters.jpg

"You're a towel"

Found one of woodward when he had short hair :)
http://i169.photobucket.com/albums/u236/Baby-G_011/surside13_edited.jpg

damn rob quit postin up your family photo's!

Lmao!!!

now ryans callin me!! hahahahaha


Thats cute! Ryan vs. Ryan on the phone.. Hey maybe ryan should call ryan while talking to ryan and all the ryans can talk on the phone at the same time

ummm... 2

ur forgetting brayan!

You<Illiteracy
Brayan>Illiteracy


hahahaha. :joker:

It hurts to laugh!

damn rob quit postin up your family photo's!

seriously lmao!

Thats cute! Ryan vs. Ryan on the phone.. Hey maybe ryan should call ryan while talking to ryan and all the ryans can talk on the phone at the same time

I can hear everything, we're 3 waying.


LOL. I kid, I kid.

already have a interview on tuesday

Awesome. Remember, hair and urine tests! lol

You<Illiteracy
Brayan>Illiteracy


hahahaha. :joker:

It hurts to laugh!

i bet... must be the high schools these days!

Awesome. Remember, hair and urine tests! lol

that **** sucked.. i had to drive an hour to do that ****!

Awesome. Remember, hair and urine tests! lol

im all good foo!

Alright sweet dremas

that **** sucked.. i had to drive an hour to do that ****!

You had to drive an hour to get drug tested at Hilmar Cheese?

Your lack of literacy is bashing your head in. lol

Damn 3 pages quickly!!

im all good foo!

I dropped acid in your beer when you came over. Why do you think we were blaring GH for so long?

Damn 3 pages quickly!!

CenCal record!

... and it ain't even monday yet and we have 3 pages in the monday thread!

You<Illiteracy
Brayan>Illiteracy


hahahaha. :joker:

It hurts to laugh!

heres a good one for ya woodward

woodward is to STLIE as brayan is to STI :joker:

heres a good one for ya woodward

woodward is to STLIE as brayan is to STI :joker:

If I was an STI I'd be slower! =P

Same block as an STI, same turbo as an STI. Psh.

You had to drive an hour to get drug tested at Hilmar Cheese?

Your lack of literacy is bashing your head in. lol

ryan(wrxisthebest)-> :pointlaugh: <-everyone else

I dropped acid in your beer when you came over. Why do you think we were blaring GH for so long?

lol we need to do that **** again i cant pass the last boss

CenCal record!

... and it ain't even monday yet and we have 3 pages in the monday thread!

this is the best thread ever!

If I was an STI I'd be slower! =P

Same block as an STI, same turbo as an STI. Psh.

but yet still not the same :( lol

You had to drive an hour to get drug tested at Hilmar Cheese?

Your lack of literacy is bashing your head in. lol

no... for my job!:invasion:

You had to drive an hour to get drug tested at Hilmar Cheese?

Your lack of literacy is bashing your head in. lol

maybe he interpreted it incorrectly again? lol

ryan(wrxisthebest)-> :pointlaugh: <-everyone else



lol we need to do that **** again i cant pass the last boss



this is the best thread ever!

.... ya.. yall laugh! whatev

just cause woodward is the only one smart enough to nit pick my posts!

but yet still not the same :( lol

I'd rather have a 5spd than a 6, true. lol


no... for my job!:invasion:

So you read like this w/o any drugs in your system??? hahaha

.... ya.. yall laugh! whatev

just cause woodward is the only one smart enough to nit pick my posts!

lol. don't worry he points out every time i miss spell something. Which is every time i post. lol

I'd rather have a 5spd than a 6, true. lol




So you read like this w/o any drugs in your system??? hahaha

ya basically..a year of doing stupid **** messed wit my brain

I'd rather have a 5spd than a 6, true. lol

sti motor is still diff than the wrx 2.5 motor.. diff heads/internals. Personally i would rather have the six speed cause its better for auto x and track racing.

lol. don't worry he points out every time i miss spell something. Which is every time i post. lol

Don't get me started on that txt you send me a bit ago... lol

lol. don't worry he points out every time i miss spell something. Which is every time i post. lol

ya.. i know.. i do it ALOT i am on a laptop that doesnt always show when i push a key!ill sit there tappin it like four times and on the fifth it works

sti motor is still diff than the wrx 2.5 motor.. diff heads/internals. Personally i would rather have the six speed cause its better for auto x and track racing.

the only reason i wopuld have the six speed is for rally x... shorter gears plus synchro in first :)

Don't get me started on that txt you send me a bit ago... lol

lol crazy shiz huh?

hey.. its monday and we already are almost on 4 pages

the only reason i wopuld have the six speed is for rally x... shorter gears plus synchro in first :)

my car = to low for deer-tay

sti motor is still diff than the wrx 2.5 motor.. diff heads/internals. Personally i would rather have the six speed cause its better for auto x and track racing.

They're both the EJ25, WRX is EJ255 and STI is EJ257. Hell, I even have bigger injectors than an STI. =P

I'm more of a drag guy than AutoX, so that's y.

the only reason i wopuld have the six speed is for rally x... shorter gears plus synchro in first :)

I'm reading online abt that. You do have a syncro and it's easy to shift into first while moving as long as you correctly rev match from 2nd to 1st.

my car = to low for deer-tay

ya.. i saw at the meet... u make mine look lifted!

I'm reading online abt that. You do have a syncro and it's easy to shift into first while moving as long as you correctly rev match from 2nd to 1st.

so i was right?

my car = to low for deer-tay

I went mudding a few weeks back at that patch on the corner of Golden St and Pedras. I think my rear diff was dragging bc I'm lowered. lol

I'm reading online abt that. You do have a syncro and it's easy to shift into first while moving as long as you correctly rev match from 2nd to 1st.

but even still 6 spd is like warm butter, the 5spd is like cutting through raw steak with a fork!

They're both the EJ25, WRX is EJ255 and STI is EJ257. Hell, I even have bigger injectors than an STI. =P

I'm more of a drag guy than AutoX, so that's y.

but yet you still dont like to launch your car? lol

same block but thats bout it! why else would a stock sti motor put out better numbers than a 2.5 wrx w/ sti bolt on components would?

I went mudding a few weeks back at that patch on the corner of Golden St and Pedras. I think my rear diff was dragging bc I'm lowered. lol

u should get a rear diff protector

so i was right?

the 02-03 first gear syncro is different than mine. Read on nasioc abt it.

O wait, nvrmind. Have someone read it for you. hahaha

so i was right?

Your lack of literacy is bashing your head in. lol

but yet you still dont like to launch your car? lol

same block but thats bout it! why else would a stock sti motor put out better numbers than a 2.5 wrx w/ sti bolt on components would?

tuning... i guess the 06-07 wrx stock ecu is dangerous to even be running on is what Brian said

the 02-03 first gear syncro is different than mine. Read on nasioc abt it.

O wait, nvrmind. Have someone read it for you. hahaha

hahahahaha!! lmao.. just give me the link!

the 02-03 first gear syncro is different than mine. Read on nasioc abt it.

O wait, nvrmind. Have someone read it for you. hahaha

good advise he seems to have the interpretation thing down! lol

Your lack of literacy is bashing your head in. lol

where was my lack of literacy? i was askin a question!

so since yall cant physically hurt me legally u think ganging up against me on the forums is funny huh?

but yet you still dont like to launch your car? lol

same block but thats bout it! why else would a stock sti motor put out better numbers than a 2.5 wrx w/ sti bolt on components would?

I didn't want to launch it bc that was right after I installed the vf39 and I knew I needed to beef up the tranny. You saw me beat greg 3 times from a dig so... shhhh. =)

lol. And where are you getting this info from??

but yet you still dont like to launch your car? lol

same block but thats bout it! why else would a stock sti motor put out better numbers than a 2.5 wrx w/ sti bolt on components would?

ummm. its a different block... literacy problems major here.. STI=EJ257, WRX=EJ255 DIFFERENT BLOCKS...

where was my lack of literacy? i was askin a question!

read below

the only reason i wopuld have the six speed is for rally x... shorter gears plus synchro in first :)

I'm reading online abt that. You do have a syncro and it's easy to shift into first while moving as long as you correctly rev match from 2nd to 1st.

so i was right?


So by asking "was i right?" you were unable to read that ryan had said "you do have a syncro". There for illiterate.. lol

ummm. its a different block... literacy problems major here.. STI=EJ257, WRX=EJ255 DIFFERENT BLOCKS...

ya still with you!! lol go read his post again and look for the letters that look like "They're both the EJ25"

you can also refer to his post that he stated his block is the same as an sti block. So i was responding to entire convo about this topic. :)

read below








So by asking "was i right?" you were unable to read that ryan had said "you do have a syncro". There for illiterate.. lol

no... i ask him on saturday night if he had a syncrho in first and he said no!

but in the aspect of my car i was wrong.. i thought i didnt have a sycrho either

ya still with you!! lol go read his post again and look for the letters that look like "They're both the EJ25"

you can also refer to his post that he stated his block is the same as an sti block. So i was responding to entire convo about this topic. :)

ohhh.. ok, my bad.. i thought u meant that they were the exact same block!

no... i ask him on saturday night if he had a syncrho in first and he said no!

but in the aspect of my car i was wrong.. i thought i didnt have a sycrho either

I didn't say "no". I said I don't think they do, then I asked Rob and he wasn't sure either. haha

and woodward the two motors also run two different compressions. wrx 8.4:1 sti 8.2:1

ohhh.. ok, my bad.. i thought u meant that they were the exact same block!

From now on, read the posts twice over. The EJ255T and EJ257T aren't exactly the same.

"The 2006 WRX short block is the same as the STI, except for the pistons. And the pistons in the WRX are the same as the STI, except for the extra 2cc of dish volume

Quirt Crawford
www.crawfordperformance.com"

I didn't say "no". I said I don't think they do, then I asked Rob and he wasn't sure either. haha

now teacher woodward, wouldn't this be an example of interpretation? lol

From now on, read the posts twice over. The EJ255T and EJ257T aren't exactly the same.

"The 2006 WRX short block is the same as the STI, except for the pistons. And the pistons in the WRX are the same as the STI, except for the extra 2cc of dish volume

Quirt Crawford
www.crawfordperformance.com"

thats what i said.. i said the blocks werent the same!! ???? where did u get that i said that they were the same.. and my bad agai.. u did ask rob and he didnt know either.. well i guess we all have some sort of crappy syncrho, that doesnt work very wel!

and woodward the two motors also run two different compressions. wrx 8.4:1 sti 8.2:1

The specs I'm reading say wrx - 8.4:1 (+/- .2) and sti - 8.2:1

lol. So they're abt the same.

close enough.. the compression difference is caused by the heads, and the pistons

now teacher woodward, wouldn't this be an example of interpretation? lol

Perfect example Rick. You pass, with a B.

Ryan, you fail. You're on the 5 year plan now. hahaha

thats what i said.. i said the blocks werent the same!! ???? where did u get that i said that they were the same.. and my bad agai.. u did ask rob and he didnt know either.. well i guess we all have some sort of crappy syncrho, that doesnt work very wel!

We don't. lol. They improved the first gear syncro in 2006 to dual-something or some shiz.

From now on, read the posts twice over. The EJ255T and EJ257T aren't exactly the same.

"The 2006 WRX short block is the same as the STI, except for the pistons. And the pistons in the WRX are the same as the STI, except for the extra 2cc of dish volume

Quirt Crawford
www.crawfordperformance.com"

so what he is trying to say is the pistons are the same, but not? lol

same:
1. identical with what is about to be or has just been mentioned:

close enough.. the compression difference is caused by the heads, and the pistons

No. The compression difference is caused between the WRX and STi's turbine fin diameter by turbine shaft lenth +/- .2 difference from the small WRX TMIC and larger STI TMIC. The larger fuel injectors will help give them similar numbers in that sense.

Perfect example Rick. You pass, with a B.

Ryan, you fail. You're on the 5 year plan now. hahaha



We don't. lol. They improved the first gear syncro in 2006 to dual-something or some shiz.

dual coned syncro

Perfect example Rick. You pass, with a B.

Ryan, you fail. You're on the 5 year plan now. hahaha



We don't. lol. They improved the first gear syncro in 2006 to dual-something or some shiz.

i personally dont have any problem getting into first gear 20mph or less.. gotta love uncle scotty's :)

No. The compression difference is caused between the WRX and STi's turbine fin diameter by turbine shaft lenth +/- .2 difference from the small WRX TMIC and larger STI TMIC. The larger fuel injectors will help give them similar numbers in that sense.

man.. i forget where i read my info up.... oh.. sorry! i was thinking of the hybrid 2.5 block and 2.0 heads.. high compression low boost!

No. The compression difference is caused between the WRX and STi's turbine fin diameter by turbine shaft lenth +/- .2 difference from the small WRX TMIC and larger STI TMIC. The larger fuel injectors will help give them similar numbers in that sense.

lol i give up.. i have just been trying to sound smart the hole time.. now im lost.. lol

i personally dont have any problem getting into first gear 20mph or less.. gotta love uncle scotty's :)

at 10 mph ill drop in if my tranny feels like it.. its really tempermental.. sometimes it will sometimes at a stop light not even moving it will grind going into first!

lol i give up.. i have just been trying to sound smart the hole time.. now im lost.. lol

ya... im not.. im use to the car lingo and talk! i work on cars daily so its more of a natural thing! soon ill be workin on subies!

man.. i forget where i read my info up.... oh.. sorry! i was thinking of the hybrid 2.5 block and 2.0 heads.. high compression low boost!

Now stare at this chart. Don't post again until you know exactly what all that means in terms of engine compression ratios.

http://www.automotivearticles.com/uploads/flow_map.jpg

i personally dont have any problem getting into first gear 20mph or less.. gotta love uncle scotty's :)

O ya. I've heard that's da shiz. I'd have it in mine right now, but I've gotta pull that tranny so I'm going to put that cocktail in 'er right after I install that ***** again.

ya... im not.. im use to the car lingo and talk! i work on cars daily so its more of a natural thing! soon ill be workin on subies!

i love car lingo and talk as well, and i do all my work on my suby my self, so its natural for me to, but i just dont give a fly fizuck about finn inlet sizes and other bs.. lol

so ryan is talkin bout compression ratio compared to turbo sizing... im talking about compresion ratio due to engine sizing.. thats y we keep getting confused on each others crap... ahhhh

Now stare at this chart. Don't post again until you know exactly what all that means in terms of engine compression ratios.

http://www.automotivearticles.com/uploads/flow_map.jpg

^^^
ya i dont really care! lol



O ya. I've heard that's da shiz. I'd have it in mine right now, but I've gotta pull that tranny so I'm going to put that cocktail in 'er right after I install that ***** again.

yes i have it in mine, devin put it in his, and so do errk.

I had a grind when shifting between 3rd and 4th at high rpm's when the tranny was hot. But ever since good ol' uncle scotty came knocking on my door the grinds have gone away :)

but ryan..a 2.5 engine with 2.0 heads is ran high compression with low boost!!!

yes i have it in mine, devin put it in his, and so do errk.

I had a grind when shifting between 3rd and 4th at high rpm's when the tranny was hot. But ever since good ol' uncle scotty came knocking on my door the grinds have gone away :)

i have that grind.. it sucks!

Low boost is not real. It's a figure of your imagination.

i guess u r right!!! in a sense! hhahahahaha but i get it!

so ryan is talkin bout compression ratio compared to turbo sizing... im talking about compresion ratio due to engine sizing.. thats y we keep getting confused on each others crap... ahhhh

Turbo fin diameters. Not 'sizing'. Sizing is what you do when you and your friends are bored.

Understand that Garret flow chart and you'll get it.

but ryan..a 2.5 engine with 2.0 heads is ran high compression with low boost!!!

wtf? when did we ever start talking about a 2.5 w/ 2.0 heads? lol

you can run any motor the way you want man.. The lower the boost the higher compression you can run. And the higher the boost the compression of the motor will have to be lowered. basic turbo stuff man

i guess u r right!!! in a sense! hhahahahaha but i get it!

You sure you really 'get' it?

There's the Jenna Jameson sense of 'getting it' then there's the 'I understand it' version of getting it.

You sure you really 'get' it?

There's the Jenna Jameson sense of 'getting it' then there's the 'I understand it' version of getting it.

I UNDERSTAND IT!

I UNDERSTAND IT!

What's the optimal boost for economic drivability based on say... 9:1 compression ratio then, based on that turbo flow chart by Garret.

You sure you really 'get' it?

There's the Jenna Jameson sense of 'getting it' then there's the 'I understand it' version of getting it.

i just peed my pants! :D

idk!!!! explain so i understand then!

I would but you can't read! hahaha. Bust out a calculator and do some math. Easy stuff.

i just peed my pants! :D

Nice avitar pikter Rick!

how do i know the inlet pressure and the discharge pressure?

Nice avitar pikter Rick!

donkey shane

I just changed mine also. Had to update it.

All the cool people speak Afrikaans, so Baie Dankie ;)

ight well im off to bed~

peace out
ryan

lol ya thats a sweet avitar picture!!! mine is of my car when it was all stock.. you remember "stage 15" set up. lol good time out in the country racin with trey

how do i know the inlet pressure and the discharge pressure?

All inlet to outlet numbers are on that flow chart per compression ratios.

lol ya thats a sweet avitar picture!!! mine is of my car when it was all stock.. you remember "stage 15" set up. lol good time out in the country racin with trey

haha. Ya, when we were both the same speed. But I had Trey and a ton of tools with me. lol ;)

Stg 5 bull****! I just met the guy a few hours before that and he tosses me the keys for his new STi... and I'd never even sat inside an STi before!

All inlet to outlet numbers are on that flow chart per compression ratios.

i cant take this shiz anymore! lol

can we rename ryan(wrxisthebest) to rylliterate? lol jk

ight well im off to bed~

peace out
ryan

Have a goodnight!

btw, I've been making up everything about compression numbers and shiz the last 3 pages. I have no idea what that chart means. I see the virgin Mary in it, personally.

haha. Ya, when we were both the same speed. But I had Trey and a ton of tools with me. lol ;)

Stg 5 bull****! I just met the guy a few hours before that and he tosses me the keys for his new STi... and I'd never even sat inside an STi before!

lol spt intake = the best.. lol

hahaha. He's a confused teenager!... Confused about his sexual orientation... lol

I'm jp with ya!!!

lol spt intake = the best.. lol

Ya, that's wierd that it f'd his car up like that. My intake costs like $10. lol

eBay bay-bay!

Have a goodnight!

btw, I've been making up everything about compression numbers and shiz the last 3 pages. I have no idea what that chart means. I see the virgin Mary in it, personally.

ahhh good times.. im off to bed as well. lol im going to come over tomorrow woodward so you can measure my compression by the turbo inlet finn. lol do you have any extra muffler bearings? lol

Sounds good. I have a wooden ruler to measure with. I have those bearings on the way from Subaru, but they're only for my 2.5L block. hahaha

Our first 'day' thread looks to be a post-whore success! High Five!

No. The compression difference is caused between the WRX and STi's turbine fin diameter by turbine shaft lenth +/- .2 difference from the small WRX TMIC and larger STI TMIC. The larger fuel injectors will help give them similar numbers in that sense.

by far the best on the fly bull shiz i have read in a while.

+1 for woodward lol

Sounds good. I have a wooden ruler to measure with. I have those bearings on the way from Subaru, but they're only for my 2.5L block. hahaha

Our first 'day' thread looks to be a post-whore success! High Five!

http://i48.photobucket.com/albums/f225/doip/borat.jpg

i never called anyone..lol i went to sleep i had my fun for the night


Thats cute! Ryan vs. Ryan on the phone.. Hey maybe ryan should call ryan while talking to ryan and all the ryans can talk on the phone at the same time

ummm. its a different block... literacy problems major here.. STI=EJ257, WRX=EJ255 DIFFERENT BLOCKS...


same blocks different heads!!!!!!

C0rrect!!!

lol

hahaha. He's a confused teenager!... Confused about his sexual orientation... lol

I'm jp with ya!!!

Hello everyone!!
Im Finally Online

I just read all seven pages and wasted 15 minutes of my life. At least it's not in the Turlock section anymore:thumb: Good info on the 2.5 block differences too. Not that it matters for my car.

I just read all seven pages and wasted 15 minutes of my life. At least it's not in the Turlock section anymore:thumb: Good info on the 2.5 block differences too. Not that it matters for my car.

lol all that info was all bs! lol woodward was just fizucking with ryan to get him all confused and worked up.. lol and i kept posting to add fuel to the fire. lol

Hello everyone!!
Im Finally Online

'bout time man! this is Rick BTW

http://i169.photobucket.com/albums/u236/Baby-G_011/256094487309b860a32ovx2.jpg

did she rip her vageeeen out and start to eat it? lol

supper time.. lol.. thanksgiving comes early

You are what you eat!



I don't have too much room to talk.

You are what you eat!



I don't have too much room to talk.
Thats why woo is a dick? :thumb:

haha. Nice burn.

Woodward:246 Jordan:1

lol

Hello everyone!!
Im Finally Online

Damian! How goes it? I saw you drive towards the freeway on Fulkerth early sunday morning. Ok, it was like 10am, but early for me.

so how about that Asian chick

The one eating that thing from another world?

yep..lol