Does anyone have step by step instructions on how to replace the Drive belts? Not the timing belt, just the two drive belts. This is specifically for a 2002 WRX.
Thanks!

I found a vid online. But basically you have to remove the plastic cover that is over the AC and alternator. Then for the alternator belt, you have to loosen the three bolts facing you. One is the pivot bolt, then there's the lock bolt, finally the adjustment bolt (up/down). Adjust it so the alternator is as far down as it will go and pull off the belt. For the AC belt, you have to loosen two bolts and adjust that pulley until it's down far enough to slide the belt off. Pretty simple.

http://www.expertvillage.com/videos/drive-belts-check.htm