Hotchkis, Cobb, Perrin, Samco, Grillcraft, uppipe fs ps. I want subiebucks
Thread Starter
Registered User
iTrader: (8)
Joined: Apr 2003
Posts: 930
From: Oakland
Car Info: 2002 4EAT MBP wrx wagon
Hotchkis, Cobb, Perrin, Samco, Grillcraft, uppipe fs ps. I want subiebucks
Hey all, Have a couple things for sale I'm putting up here before I throw the, to the nasioc dogs in a few days. All things available for pickup in Oakland, CA right off the 13 or 580. I am open to trades for subiebucks, an oem roofbasket, cf goodies, stromung 3rd cat pipe, perrin catch, and whatever you might want to try and run by me.
Hotchkis front endlinkes (02-03 sedan and it seems to be the same links used in the rear for the sti)
Brand-new never installed Adjustable, spherical.
$60
Hotchkis heavy duty mounts. Brand new. Replaces stock flimsy mounts. Comes with your choice of 24mm greasable bushings for the hotchkis/cobb tubular sways or 20mm nongreasable bushing for oem sized sways.
$50
buy both for $100.

Another set of hotchkis heavy duty mounts. Bolt holes need to be drilled out just a tad to fit (hotchkis corrected this on later models as you can see from the pic). Powdercoated in a gunmetal color. Comes with bolts, hardware etc and 24mm bushings
$20

Perrin Pulley: excellent condition
$80
[IGM]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTEzODcwMDZzNDEzZGZkMzF5NTQx.jpg[/IMG]
Cobb Street Formula Breakpads: Great all around street/autox pad, low dust/noise. Bought used, didn't fit my car (2002) These are the redesigned pad shape that won't fit the 2002, should fit most 2003's and on please check your car. Good amount of meat left I believe I was told 5k-7k of use or less, see photos.
$100



Ported and Polished intercooler pipes for a wrx topmount IC and blue samco y-pipe. Not off the car yet, but was told it won't fit my sti IC. Excellent mod, one of the best I've done. Porting alone was 45. Ypipe in good condition, no tears. No pics as it is not off my car yet. Gauging interest in at $110 obo for the set.
Grillcraft hood scoop grill (02-03 stock size) never installed, brand new with hardware and a sticker!, one small chip in the powdercoat that can be touched up.
$35


STI Upipe, no cat, no heatshields, looks good, all studs in good condition except one, but I could change that out in a few days with one of my stock ones if you need.
Make an offer


Finally, no name open end lugs silver, not tuner lugs or anything.
$5
Try to make me offers for this stuff in the next few days. Thanks a lot. - Patrick
Hotchkis front endlinkes (02-03 sedan and it seems to be the same links used in the rear for the sti)
Brand-new never installed Adjustable, spherical.
$60
Hotchkis heavy duty mounts. Brand new. Replaces stock flimsy mounts. Comes with your choice of 24mm greasable bushings for the hotchkis/cobb tubular sways or 20mm nongreasable bushing for oem sized sways.
$50
buy both for $100.

Another set of hotchkis heavy duty mounts. Bolt holes need to be drilled out just a tad to fit (hotchkis corrected this on later models as you can see from the pic). Powdercoated in a gunmetal color. Comes with bolts, hardware etc and 24mm bushings
$20

Perrin Pulley: excellent condition
$80
[IGM]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTEzODcwMDZzNDEzZGZkMzF5NTQx.jpg[/IMG]
Cobb Street Formula Breakpads: Great all around street/autox pad, low dust/noise. Bought used, didn't fit my car (2002) These are the redesigned pad shape that won't fit the 2002, should fit most 2003's and on please check your car. Good amount of meat left I believe I was told 5k-7k of use or less, see photos.
$100



Ported and Polished intercooler pipes for a wrx topmount IC and blue samco y-pipe. Not off the car yet, but was told it won't fit my sti IC. Excellent mod, one of the best I've done. Porting alone was 45. Ypipe in good condition, no tears. No pics as it is not off my car yet. Gauging interest in at $110 obo for the set.
Grillcraft hood scoop grill (02-03 stock size) never installed, brand new with hardware and a sticker!, one small chip in the powdercoat that can be touched up.
$35


STI Upipe, no cat, no heatshields, looks good, all studs in good condition except one, but I could change that out in a few days with one of my stock ones if you need.
Make an offer


Finally, no name open end lugs silver, not tuner lugs or anything.
$5
Try to make me offers for this stuff in the next few days. Thanks a lot. - Patrick
Thread Starter
Registered User
iTrader: (8)
Joined: Apr 2003
Posts: 930
From: Oakland
Car Info: 2002 4EAT MBP wrx wagon
hmmm not sure of the part numbers. mounts are the same. endlinks are ones that fit front sedan which seems to be 01+ according to hotchkis' website. but the design seems to have been changed slightly. Should fit fine on an 05 so long as it's a sedan. do you need the 20mm bushings or the 24 (is it 24 for the hotchkis/cobb bars?).
Registered User
iTrader: (2)
Joined: Feb 2005
Posts: 79
From: NORTH BAY
Car Info: 97 legacy OB w/99 RS sohc... Passes smog. 96 OBS-- sold
Dibs on the front endlinks!
I'm heading to OAK airport on friday.... not sure when at this time.
PMed you my contact info.
Cheers!
Bill
I'm heading to OAK airport on friday.... not sure when at this time.
PMed you my contact info.
Cheers!
Bill
Registered User
iTrader: (2)
Joined: Feb 2005
Posts: 79
From: NORTH BAY
Car Info: 97 legacy OB w/99 RS sohc... Passes smog. 96 OBS-- sold
OUUP. Didn't see his post... you're right... it's right there in print. I guess you can put me second in line.
I'll try resending contact info. Looks like I won't be going to the airport again until Monday now anyhow. Let me know.
I'll try resending contact info. Looks like I won't be going to the airport again until Monday now anyhow. Let me know.
Thread
Thread Starter
Forum
Replies
Last Post
pleue
NorCal Classifieds
9
May 9, 2008 11:14 AM
yzercyber
Interior, Exterior & Lighting
9
Dec 14, 2004 08:41 PM
SbRCR267
New Aftermarket Car Parts For Sale
3
Mar 7, 2004 07:16 PM



